Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
Rex Rex is offline
external usenet poster
 
Posts: 373
Default How does gasoline go "bad"? When?

On Thursday, November 1, 2012 10:10:25 PM UTC-5, Existential Angst wrote:
http://www.straightdope.com/columns/...ale-so-quickly



Basically answered all my questions -- I don't necessarily agree with it

all, but it's a good discussion.

For example, it's very difficult to oxidize a hydrocarbon without enzymes,

catalysts, and the like. And I don't think the "lost volatiles" in old gas

amount to much ito performance.



Bottom line is, I don't think "bad gasoline" ito age is much to worry about.

After this bull**** with Sandy, NOW we got a gas crisis, so ahm fixin to

store a bunch. I figger I'll "exchange" it yearly -- it's own pita, but it

beats waiting 4 hours on line for 10 gals of ****ing gas.



I used to scoff at survivalists.... but not any more. I'm realizing that

urbanites/surburbanites are essentially walking around with their cheeks

spread.


This is true. I'm a bit of a low-scale prepper - generator, emergency food, water tanks. My backup fuel supply is an older F350 with dual tanks. I drive it seldom, and keep it topped up - 33 gallons. I've thought about adding a 3rd tank in the bed. There is a 100-gallon tank w/transfer pump on CL right now that is tempting.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Under the banner of "Si, Se Puede" "Moving America Forward""Latino Voter Registration Drives"... Warren Penn Home Repair 0 April 18th 12 10:38 PM
OT Obama's "Pass this Bill" == "Spend this money" was Nothing funnier or dumber than a conservative saying "I don't have a job because of Obama" F. George McDuffee Metalworking 0 September 11th 11 07:30 PM
I am looking for a local source for "Rockwool" / "Mineral Wool" /"Safe & Sound" / "AFB" jtpr Home Repair 3 June 10th 10 06:27 AM
For women who desire the traditional 12-marker dials, the "Faceto,""Juro" and "Rilati" all add a little more functionality, without sacrificingthe diamonds. [email protected] Woodworking 0 April 19th 08 11:12 AM
Orange Peel Texture? "Knockdown" or "Skip Trowel" also "California Knock-down" HotRod Home Repair 6 September 28th 06 01:48 PM


All times are GMT +1. The time now is 08:25 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"