Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Bushing material
I want to spin a nylon shaft in a plain bearing/bushing at low rpm. Is
the choice of bushing material critical? Will brass or copper do? As a matter of general principle should the shaft and bushing be made of different material? What would happen (for argument's sake) if one spun a brass shaft in a copper bushing? Thanks, Michael Koblic, Campbell River, BC |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Bushing Guide Rod ??? | Metalworking | |||
arbor bushing | Woodworking | |||
Request for material recommendation for a Titanium grade or similarlightweight material with high yield strength | Metalworking | |||
Valve guide bushing material | Metalworking | |||
Request for material recommendation for plain sleeve bushing | Metalworking |