Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
12 foot, 50 ton Dake H-press that I won
|
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
12 foot, 50 ton Dake H-press that I won
Ignoramus12024 writes:
http://www.premierarg.com/item.cgi?show_item=0000022170 A friend asked "Why is the highest bidder of an eBay auction called 'the winner'..." and I had no answer... -- A host is a host from coast to & no one will talk to a host that's close........[v].(301) 56-LINUX Unless the host (that isn't close).........................pob 1433 is busy, hung or dead....................................20915-1433 |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
12 foot, 50 ton Dake H-press that I won
On Wed, 13 Jun 2012 19:55:08 -0500, Ignoramus12024
wrote: http://www.premierarg.com/item.cgi?show_item=0000022170 Dake presses are built in Grand Haven, Michigan. One of the best places to go to the beach here in West Michigan. I've been going there since I was a kid. Here's a link to a GH beach cam just so you can do a daily check of the weather at the beach. I do every day in the summer. Gallery of fav pics there too. http://www.earthcam.com/usa/michigan.../lakemichigan/ Great little city. Dave |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
12 foot, 50 ton Dake H-press that I won
On Wed, 13 Jun 2012 19:55:08 -0500, Ignoramus12024
wrote: http://www.premierarg.com/item.cgi?show_item=0000022170 Hey Iggy, WOW !!! Watch for a counterweight that is too heavy....look at the top cross-frame(s). The remaining one is bent, and looks to me like they cut the front one off because to was too badly bent to leave. Strange. Brian Lawson. |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
12 foot, 50 ton Dake H-press that I won
On 2012-06-14, Brian Lawson wrote:
On Wed, 13 Jun 2012 19:55:08 -0500, Ignoramus12024 wrote: http://www.premierarg.com/item.cgi?show_item=0000022170 Hey Iggy, WOW !!! Watch for a counterweight that is too heavy....look at the top cross-frame(s). The remaining one is bent, and looks to me like they cut the front one off because to was too badly bent to leave. Strange. I am not sure if the front one ever existed. I bet that they bent it when moving this press with a crane, there is a mark in the middle from a crane hook. i |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Just cut 30-foot tall 1.5 foot diameter oak (how long to dry out?) | Home Repair | |||
How to prune the top of a 30 foot oak tree so it's a 20 foot tall oak tree | Home Repair | |||
FS: Powermatic 1150 drill press, with foot pedal | Woodworking | |||
Famco foot press for sale in Oak Park, IL | Metalworking | |||
Dake TB16 or SB16 Drill Press | Metalworking |