 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Loctite vs. various lock/split washers vs...... epoxy??
Iffin you REALLY wanted to be sure that a nut won't fall off a screw, or a
screw will loosen, wouldn't plain ole 2-part epoxy be the best bet? Also, if an epoxied screw/nut did have to come off, wouldn't a little heat do it? -- EA |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Best way to apply Loctite 290 | Home Repair | |||
| Which do you like more, split ring lock washers or the other kind? | Home Repair | |||
| nuts with nylon inserts versus lock washers and jamb nuts | Home Repair | |||
| Does fresh epoxy stick to dried epoxy? | Woodworking | |||
| Source for GOOD bolts, washers, copper washers, etc? | Metalworking | |||
![Existential Angst[_2_] is offline](https://www.diybanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Threaded Mode
