Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
bond tiny bushing
I've got an egg shaped hole in the lock frame on my 1919 BMG...
This part is hardened 4140 and its hard to get into the deep hole anyway so welding it shut and remachining don't look like a good option. So is there a good way to bond a bushing with a 0.187" OD by 0.150" high into a bore? What would you use? FWIW, if I tried a press fit, it would just break the part. Karl |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Bushing Guide Rod ??? | Metalworking | |||
arbor bushing | Woodworking | |||
Tiny, tiny metalwork - chip re-soldering | Metalworking | |||
Peter Ho has different ideas. With a stack of films and TV dramasunder his belt as well as proving to be a hit in Crouching Tiger, HiddenDragon, he's hoping the Bond producers will encourage a different directionwith a Chinese Bond. Dressed to impres | Woodworking | |||
Bond. James Bond. | Metalworking |