 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Where to buy solid carbide end mills
I need the following:
3/4 d x 2-1/4" LOC rougher 3/4" x 4" LOC rougher or.... a 3/4" d x 2" plus LOC with a 4" reach. Currently using a 3" LOC with releif ground into the shank to give me 4.06 reach. MSC no gots. Not real happy with where I get them now, as I just killed 2 of the 3/4 x 2.25 mills in a few minutes. They blame my machine, I run a 3/4 x 4" loc Hanita in there just fine. Remove 333 to reply |
|
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
|
Where to buy solid carbide end mills
Randy wrote in news:ju2gl71ak7ca0hesm8bt3hl7e9lo6j99hm@
4ax.com: I need the following: 3/4 d x 2-1/4" LOC rougher 3/4" x 4" LOC rougher or.... a 3/4" d x 2" plus LOC with a 4" reach. Currently using a 3" LOC with releif ground into the shank to give me 4.06 reach. MSC no gots. Not real happy with where I get them now, as I just killed 2 of the 3/4 x 2.25 mills in a few minutes. They blame my machine, I run a 3/4 x 4" loc Hanita in there just fine. Have you tried McMaster or Grainger? |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| carbide vs. solid carbide? Cheap carbide? | Metalworking | |||
| carbide vs. solid carbide? Cheap carbide? | Metalworking | |||
| carbide vs. solid carbide? Cheap carbide? | Metalworking | |||
| carbide vs. solid carbide? Cheap carbide? | Metalworking | |||
| carbide vs. solid carbide? Cheap carbide? | Metalworking | |||
Linear Mode
