Where to buy solid carbide end mills
I need the following:
3/4 d x 2-1/4" LOC rougher 3/4" x 4" LOC rougher or.... a 3/4" d x 2" plus LOC with a 4" reach. Currently using a 3" LOC with releif ground into the shank to give me 4.06 reach. MSC no gots. Not real happy with where I get them now, as I just killed 2 of the 3/4 x 2.25 mills in a few minutes. They blame my machine, I run a 3/4 x 4" loc Hanita in there just fine. Remove 333 to reply |
Where to buy solid carbide end mills
Randy wrote in news:ju2gl71ak7ca0hesm8bt3hl7e9lo6j99hm@
4ax.com: I need the following: 3/4 d x 2-1/4" LOC rougher 3/4" x 4" LOC rougher or.... a 3/4" d x 2" plus LOC with a 4" reach. Currently using a 3" LOC with releif ground into the shank to give me 4.06 reach. MSC no gots. Not real happy with where I get them now, as I just killed 2 of the 3/4 x 2.25 mills in a few minutes. They blame my machine, I run a 3/4 x 4" loc Hanita in there just fine. Have you tried McMaster or Grainger? |
All times are GMT +1. The time now is 05:27 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter