Home |
Search |
Today's Posts |
![]() |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On Sat, 03 Dec 2011 03:02:55 -0800, Gunner Asch
wrote: https://picasaweb.google.com/1040422...15534047903506 https://picasaweb.google.com/1040422...15793966013074 https://picasaweb.google.com/1040422...16686683095186 https://picasaweb.google.com/1040422...16798214073362 Dirty..ugly and nasty..but in surprisngly good shape and very very little backlash in any axis. A couple of the switches need replacing, I can do it..or you can do it for a discount. It has both vertical AND horizontal spindles and motors. Everything runs nicely. $1800 OBO. Ill even toss in a few 40 taper tool holders and a decent vise (Kurt Klone) Located in Chino California. About 2000 lbs 220vt 3ph Gunner This looks like a hell-of-a milling machine. That 40 taper is a HUGE improvement over R8. Somebody on the left hand side should snap this up. Karl |
Thread Tools | Search this Thread |
Display Modes | |
|
|