Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
hydraulic snowblower
"The Kid" scored a 60" Arps tractor snowblower at an auction today...
He wants to run it on his skid steer. Just cut off the three point, put on a hydraulic motor and mount plate. His question, which hydraulic motor? He's got 10.5 GPM at 2000PSI on the skid steer. The blower should run 500 RPM. OK, I'd do 10gpm*231 in3/gal is 2310 in3/min 2310in3/500 is 4.6in3 motor http://www.surpluscenter.com/sort.as...c&keyword=HML1 Any more to it than just getting one of the bottom three selections from surplus center? What hp will he get to the blower? I got 13hp but I'm probably doing something wrong so I won't share my work G At any rate, I'm telling him he's going to be limited on blowing power. My 72" PTO blower can bring a 60 horse tractor to its knees. Karl |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Snowblower | Home Repair | |||
Snowblower..... | Home Repair | |||
Snowblower...? | Electronics Repair | |||
Snowblower | Home Repair |