Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 3,055
Default OT, but relevant .................. air beds .......

Does anyone have one of those air beds? The expensive ones like Sleep
Number? Any recommendations? I got to get a better, different bed, but
that's a big chunk to spend without some input. I think they all have a 90
day free trial thing.

Input appreciated.

Netnannies, just take three Xanaxes and a thorazine, and write in when you
wake up.

Steve




  #2   Report Post  
Posted to rec.crafts.metalworking
Doc Doc is offline
external usenet poster
 
Posts: 18
Default OT, but relevant .................. air beds .......

"Steve B" wrote in
:

Does anyone have one of those air beds? The expensive ones like Sleep
Number? Any recommendations? I got to get a better, different bed,
but that's a big chunk to spend without some input. I think they all
have a 90 day free trial thing.

I have had two of them and they have been the best beds I have ever used.
My own experience has been that they suport you completely and that the
concepts of a firm vs.soft matresses goes away as you get a lot of
support even at lower settings.
The first one lasted for 11 years and four moves before one of the air
chambers started leaking and I decided to replace the whole thing rather
than trying to match up parts.

My current bed is a king with two chambers and a double pump allowing
control on each side. The cost was around $800 I think. This bed looks
exactly like a regular matress and uses a platform with no box spring
(although you can buy a solid platform that looks like a box spring if
necessary). The pump appears to be a diaphram pump and is quiet but
noticable when used. The old bed sounded like a vacuum cleaner and was a
lot louder (one of the reasons for replacement). I tend not to adjust the
bed very much after finding the right feel and do not use any of the
digital number systems, assuming that if I really was concerned I could
plumb in a pressure gauge to determine a repeatable setting.

Check out these guys, http://www.airbedsunlimited.com

I bought the last bed through them. Do not let the website scare you off,
they are really great to deal with.

  #3   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 506
Default OT, but relevant .................. air beds .......

On Oct 24, 1:50*am, Doc wrote:
"Steve B" wrote :

Does anyone have one of those air beds? *The expensive ones like Sleep
Number? *Any recommendations? *I got to get a better, different bed,
but that's a big chunk to spend without some input. *I think they all
have a 90 day free trial thing.


I have had two of them and they have been the best beds I have ever used.
My own experience has been that they suport you completely and that the
concepts of a firm vs.soft matresses goes away as you get a lot of
support even at lower settings.
The first one lasted for 11 years and four moves before one of the air
chambers started leaking and I decided to replace the whole thing rather
than trying to match up parts.

My current bed is a king with two chambers and a double pump allowing
control on each side. The cost was around $800 I think. This bed looks
exactly like a regular matress and uses a platform with no box spring
(although you can buy a solid platform that looks like a box spring if
necessary). The pump appears to be a diaphram pump and is quiet but
noticable when used. The old bed sounded like a vacuum cleaner and was a
lot louder (one of the reasons for replacement). I tend not to adjust the
bed very much after finding the right feel and do not use any of the
digital number systems, assuming that if I really was concerned I could
plumb in a pressure gauge *to determine a repeatable setting.

Check out these guys,http://www.airbedsunlimited.com

I bought the last bed through them. Do not let the website scare you off,
they are really great to deal with.


Did you have air loss where it would repressurise during the night. I
had a friend in the hospital and her bed would pump itself up every 10
minutes or so.
Karl
  #4   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 397
Default OT, but relevant .................. air beds .......

On Tue, 25 Oct 2011 05:11:23 -0700 (PDT), "
wrote:

Did you have air loss where it would repressurise during the night. I
had a friend in the hospital and her bed would pump itself up every 10
minutes or so.


That's not what you think it is... It does that 10-minute cycle
deliberately, and the mattress pad has two different zones kinda like
two cheap I-beam beach mattresses put together out of phase. ABABAB

It's to avoid (and/or heal) bed-sores in people who have poor
peripheral circulation and can't move at all, from either paralysis or
sedation - the mattress pad does the periodic moving and shifting FOR
them.

-- Bruce --
  #5   Report Post  
Posted to rec.crafts.metalworking
Doc Doc is offline
external usenet poster
 
Posts: 18
Default OT, but relevant .................. air beds .......

"Bruce L. Bergman (munged human readable)"
wrote in
:

On Tue, 25 Oct 2011 05:11:23 -0700 (PDT), "
wrote:

Did you have air loss where it would repressurise during the night. I
had a friend in the hospital and her bed would pump itself up every 10
minutes or so.


That's not what you think it is... It does that 10-minute cycle
deliberately, and the mattress pad has two different zones kinda like
two cheap I-beam beach mattresses put together out of phase. ABABAB

It's to avoid (and/or heal) bed-sores in people who have poor
peripheral circulation and can't move at all, from either paralysis or
sedation - the mattress pad does the periodic moving and shifting FOR
them.

-- Bruce --


Also the control over the pump in the case of a home air bed is manual. I
only use the pump when I want to change the pressure and have not done so
in over a year. And to alleviate obvious concerns, no they do not leak if
from a good company. I did have one start to leak after ten years, but I
suspect that the number of moves I had made and the technology of that
bed contributed to the problem.(you can only fold up an air bladder so
many times) I could have just patched the leak as the bed was made of a
latex material, but it was easier to use it as an excuse to upgrade.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Craftmatic Adjustable Beds are the Ultimate Patient Beds Craftmatic Home Repair 6 May 29th 10 04:51 AM
mostly off topic, but woodworking relevant marc rosen Woodworking 19 March 11th 08 11:39 PM
off topic, but relevant to some mof us marc rosen Woodworking 8 November 23rd 05 02:49 PM
From a.h.puns but relevant here. You must have met these guys!!! nemo UK diy 4 March 29th 05 10:35 PM
Slightly OT-- but relevant--about this group. [email protected] Home Repair 24 March 8th 05 07:31 PM


All times are GMT +1. The time now is 02:31 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"