Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Vibration at Part-off
My CNC Cincinnati Hawk 150 started to make a big noise/vibration while
Part-off. I make the machine turn counterclockwise with the tool upside down. Somebody told me the problem could be (this is only a possibility) the ways are worn because it's not a normal/good practice to use the CNC that way for Part-off. What do you think about ? Has somebody had this problem? What do you suggest, changing the ways is a very expensive test to do, I have a small machine shop and I need this machine for my biggest customer. Thanks very much |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Vibration analysis | Metalworking | |||
Help please grinder vibration | Woodworking Plans and Photos | |||
vibration | Woodworking | |||
Television Vibration | Electronics Repair |