Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Best practices for trailer electrical wiring
The trailer that I bought, has electric brakes and electric lights.
The lights worked intermittently, such as worked only once or twice. The electric plug is a two piece job, with wires held by screws, some wires fell out. Not good enough. I bought a replacement molded one piece plug with 8 foot tail, and will use it. What I want is to do a good job rewiring the trailer. I believe that the trailer body is used as negative ground, which is not so great when there is corrosion. So I want to be sure that I follow "best practices" and to know what they are. Any suggestions? i |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
OT - Trailer Wiring Problem | Home Repair | |||
Trailer wiring problem | Metalworking | |||
Question about trailer electrical service | Home Repair | |||
Trailer House Electrical Nightmare | Home Repair | |||
Trailer wiring problems | Electronics |