Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #10   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1,384
Default OT-Power grid changes

Cydrome Leader wrote:



What is the poing of the frequency variation in the first place? it's
never explained in the links.

A control systems group at our university tried to understand the stability
of the electrical grid. This was a big, multi-year DOE grant. They wrote
a software simulation, with generating plants, loads and transmission lines.
As I understand it, they eventually found that the problem is essentially
mathematically intractable, but that they were able to establish certain
bounds to the solution. What that all means is that the grid is not really
very stable at all, somewhat like a whole bunch of masses tied together by
a network of springs, and energy being added and subtracted here and there.
Resistance of the transmission lines and the huge resistance of resistive
loads (incandescent lights and toasters) may be the only thing keeping it
from going wildly unstable. They do experience periods of smaller
instability now and then, and sometimes have to pull a generating station
offline to break the cycle of reactive power bouncing back and forth from
one region to another.

So, with that background, **I THINK** what is going on is they think there
may be a way to reduce some of these stability problems if they don't
try to maintain exact frequency all the time, TOO. Stability is a LOT
more important than minor frequency variations.

Jon


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
OT -- off grid power systems David Lesher Metalworking 22 March 30th 10 02:30 PM
Off grid power generation, AC vs DC [email protected] Metalworking 9 September 16th 09 03:46 AM
QUESTION: How to connect a power supply to my home power grid? S Claus Electronics 6 July 29th 09 01:08 PM
Accuracy of UK power grid time control? Mike Berger Electronics Repair 76 April 19th 06 11:56 PM
Off-grid power (long) Colin Blackburn UK diy 19 February 4th 05 12:10 PM


All times are GMT +1. The time now is 10:57 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"