Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Rethreading spot welder tongs?
On Jun 23, 2:22*am, mike wrote:
I have an old Dayton 2Z543 hand held 115V spot welder. The tips screw into the tongs, but the threads are stripped. Been using it that way for a decade, but it's got to the point that I'm burning holes when the tips tilt and the contact area is small. Or maybe a highly conductive heli-coil? Thanks, mike How about making something like a keensert out of copper? That is a bushing that is threaded on the inside and outside. Dan |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Ques about spot welder OCV | Metalworking | |||
FS: 50KVA Spot Welder FS | Metalworking | |||
Spot welder info please | Metalworking | |||
Scaling down a spot welder? | Metalworking | |||
spot welder | Metalworking |