Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Filling 20lb & 30lb propane tanks
Hi Snag,
Excellent suggestion, I will give it a try. Unfortunately the 30lb tanks were already partially filled (1/4 way) so I would be losing a lot of product if I vent. Ivan Vegvary |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Filling 20lb & 30lb propane tanks
On 6/18/2011 8:28 PM, Ivan Vegvary wrote:
Hi Snag, Excellent suggestion, I will give it a try. Unfortunately the 30lb tanks were already partially filled (1/4 way) so I would be losing a lot of product if I vent. Ivan Vegvary Snag's idea will work in reverse also, hook the 30# tanks back up & warm them up & they will empty back into the big tank, then you can just vent the remaining gas- assuming no check valves in the setup. MikeB |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Filling 20lb & 30lb propane tanks
Ivan Vegvary wrote:
Hi Snag, Excellent suggestion, I will give it a try. Unfortunately the 30lb tanks were already partially filled (1/4 way) so I would be losing a lot of product if I vent. Ivan Vegvary Use what's in there before you try again ... -- Snag Learning keeps you young ! |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Filling 20lb & 30lb propane tanks
BQ340 wrote:
On 6/18/2011 8:28 PM, Ivan Vegvary wrote: Hi Snag, Excellent suggestion, I will give it a try. Unfortunately the 30lb tanks were already partially filled (1/4 way) so I would be losing a lot of product if I vent. Ivan Vegvary Snag's idea will work in reverse also, hook the 30# tanks back up & warm them up & they will empty back into the big tank, then you can just vent the remaining gas- assuming no check valves in the setup. MikeB I'm going on personal experience , we did our camper tanks from Dad's 200 gallon tank . Also did torch bottles , sure beat the prices at the hardware store ! -- Snag Learning keeps you young ! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Filling 20lb & 30lb propane tanks | Metalworking | |||
Filling 20 lb Propane tanks | Home Repair | |||
yet another use for old propane tanks .. ?? | Metalworking | |||
New use for 20 Lb propane tanks | Metalworking | |||
OLD use for 20 Lb propane tanks | Metalworking |