Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Reamer Usage
How much material (depth of cut) should you plan to remove with a .125"
reamer in brass for a precise bore? (diameter, obviously the direction and position will be dictated by the accuracy of the original drilled hole) How fast would you turn it, or in a lathe the work piece? What lubricant / coolant would you use? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Reamer RPM Chart? | Metalworking | |||
length of threads on 1 inch black pipe? and reamer usage | Metalworking | |||
Reamer storage | Metalworking | |||
Question about .381 or 9.7 mm Reamer | Metalworking | |||
Help with adjustable reamer | Metalworking |