On Thu, 16 Jun 2011 09:06:38 -0700, "Bob La Londe"
wrote:

How much material (depth of cut) should you plan to remove with a .125"
reamer in brass for a precise bore?
(diameter, obviously the direction and position will be dictated by the
accuracy of the original drilled hole)

How fast would you turn it, or in a lathe the work piece?

What lubricant / coolant would you use?



4584 RPM Feed = 0.0015 per rev. or 6.87 IPM

drill with #31 drill 0.1200"

cut dry, maybe air blast to clear chips out.

Remove 333 to reply.
Randy