 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Holding round objects in vise
I'd put small cylinders in a pin vise, large disks in
a four-jaw chuck (I have one suitable for positioning under a drill press). I guess V blocks would let me put the pin vise (or a spare Jacobs chuck, for that matter) in a vise that clamps down to the drill table or mill table. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Holding round objects in vise | Metalworking | |||
| turning objects | Woodturning | |||
| Falling objects | Home Repair | |||
| Holding threaded rod in a vise | UK diy | |||
| Musing about wood going round and round. Where it stops nobodyknows! | Woodturning | |||
Linear Mode
