Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Right angle drives, for drilling?
Right angle drives, for drilling?Specifically, the inexpensive
Vermont American 17172. Will it support an 18 V cordless drill? Milwaukee makes a heavy duty version, part number 48-06-2871, and a lighter duty version 49-22-8510. Any other right angle drives/gearing that will support the power of a Bosch/DeWalt 18V cordless drill? Thanks. |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Right angle drives, for drilling?
http://www.harborfreight.com/power-t...ill-67043.html
http://www.harborfreight.com/power-t...ill-92956.html http://www.harborfreight.com/power-t...uck-95877.html Why screw around? JR Dweller in the cellar On 02 Feb 2011 02:47:44 GMT, John Doe wrote: Right angle drives, for drilling?Specifically, the inexpensive Vermont American 17172. Will it support an 18 V cordless drill? Milwaukee makes a heavy duty version, part number 48-06-2871, and a lighter duty version 49-22-8510. Any other right angle drives/gearing that will support the power of a Bosch/DeWalt 18V cordless drill? Thanks. |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Right angle drives, for drilling?
On 2011-02-02, JR North wrote:
On 02 Feb 2011 02:47:44 GMT, John Doe wrote: [ ... ] Right angle drives, for drilling?Specifically, the inexpensive Vermont American 17172. Will it support an 18 V cordless drill? Milwaukee makes a heavy duty version, part number 48-06-2871, and a lighter duty version 49-22-8510. Any other right angle drives/gearing that will support the power of a Bosch/DeWalt 18V cordless drill? [ ... ] http://www.harborfreight.com/power-t...ill-67043.html http://www.harborfreight.com/power-t...ill-92956.html http://www.harborfreight.com/power-t...uck-95877.html Why screw around? If you want something which is battery powered, and does a nice job, take a look at the following item from Rigid: http://www.homedepot.com/h_d1/N-5yc1...atalogId=10053 with the following needed to power it: http://www.homedepot.com/h_d1/N-5yc1...atalogId=10053 FWIW -- I have this kit, the drill head above, and the hammer which follows: http://www.homedepot.com/h_d1/N-5yc1...atalogId=10053 and have found all to be quite useful. I haven't bothered with the impact drivers or the ratchet heads, because I have compressed air tools for that. (Actually, for the drill too -- but this one has plenty of torque to drive drywall screws.) So -- if you can benefit from other parts of the kit, you might find the kit better than a single tool. I used them all for some drywall work and installing outlets in cramped spaces (which is where the power hammer helped -- there was not room to swing a good hammer to attach the outlet boxes to the framing. Yes, it is 12V not 18V, but it is also LiIon and seems to do better than a similar volume of NiCad cells. Enjoy, DoN. -- Remove oil spill source from e-mail Email: | Voice (all times): (703) 938-4564 (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html --- Black Holes are where God is dividing by zero --- |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Right angle drives, for drilling?
John Doe wrote:
Right angle drives, for drilling?Specifically, the inexpensive Vermont American 17172. Will it support an 18 V cordless drill? Milwaukee makes a heavy duty version, part number 48-06-2871, and a lighter duty version 49-22-8510. Any other right angle drives/gearing that will support the power of a Bosch/DeWalt 18V cordless drill? Define "support"? If your drill motor has a chuck, it will be supported. Is it sturdy and beefy and something you would expect to last a few years on a jobsite? Mine doesn't feel that solid, but for what it is it works great. Jon |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
Right angle drives, for drilling?
"Jon Danniken" jonSPAMMENOTdanniken yahSPAMhoo.com wrote:
John Doe wrote: Right angle drives, for drilling?Specifically, the inexpensive Vermont American 17172. Will it support an 18 V cordless drill? Milwaukee makes a heavy duty version, part number 48-06-2871, and a lighter duty version 49-22-8510. Any other right angle drives/gearing that will support the power of a Bosch/DeWalt 18V cordless drill? Define "support"? Being able to handle the power of the drill. Being able to handle the torque that the drill is able to output. Having the same torque handling capacity and durability as the other parts in the specified tools. -- If your drill motor has a chuck, it will be supported. Is it sturdy and beefy and something you would expect to last a few years on a jobsite? Mine doesn't feel that solid, but for what it is it works great. Jon |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
Right angle drives, for drilling?
On Feb 1, 9:41*pm, John Doe wrote:
"Jon Danniken" jonSPAMMENOTdanniken yahSPAMhoo.com wrote: John Doe wrote: Right angle drives, for drilling?Specifically, the inexpensive Vermont American 17172. Will it support an 18 V cordless drill? Milwaukee makes a heavy duty version, part number 48-06-2871, and a lighter duty version 49-22-8510. Any other right angle drives/gearing that will support the power of a Bosch/DeWalt 18V cordless drill? Define "support"? * Being able to handle the power of the drill. Being able to handle the torque that the drill is able to output. Having the same torque handling capacity and durability as the other parts in the specified tools. -- If your drill motor has a chuck, it will be supported. Is it sturdy and beefy and something you would expect to last a few years on a jobsite? *Mine doesn't feel that solid, but for what it is it works great. Jon- Hide quoted text - - Show quoted text - It all depends on what you want to do with the drill. Small holes, sure, spade bits, maybe, driving 3" holesaws, probably not. I solved the problem of needing a right-angle drive by getting a pneumatic right-angle drill. Not cordless but WILL run off the CO2 tank. Very compact and all the power I need. I don't run it day in and day out, though. YMMV Stan |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
Right angle drives, for drilling?
|
#8
Posted to rec.crafts.metalworking
|
|||
|
|||
Right angle drives, for drilling?
"Michael A. Terrell" mike.terrell earthlink.net wrote:
wrote: I solved the problem of needing a right-angle drive by getting a pneumatic right-angle drill. Not cordless but WILL run off the CO2 tank. Very compact and all the power I need. I don't run it day in and day out, though. YMMV It shouldn't overheat, run from compressed CO2. What size and weight of CO2 canister would you need for comparable work of an 18 V drill using a 2.4 amp hour battery? |
#9
Posted to rec.crafts.metalworking
|
|||
|
|||
Right angle drives, for drilling?
responding to
http://www.rittercnc.com/metalworkin...ng-489371-.htm artisticirondesign wrote: John Doe wrote: Right angle drives, for drilling?Specifically, the inexpensive Vermont American 17172. Will it support an 18 V cordless drill? Milwaukee makes a heavy duty version, part number 48-06-2871, and a lighter duty version 49-22-8510. Any other right angle drives/gearing that will support the power of a Bosch/DeWalt 18V cordless drill? Thanks. Maybe you can get more ideas from proffessionals or you may also hire someone to do that for you ( professional of course) you may call in Artistic Iron Design specializes in providing high quality services. ArtisticIronDesign(dot)BmbNow(dot)com -- _ _ _ _ | |_ | |__ (_) ___ (_) ___ _ __ ___ _ _ | __|| '_ \ | |/ __| | |/ __| | '_ ` _ \ | | | | | |_ | | | || |\__ \ | |\__ \ | | | | | || |_| | \__||_| |_||_||___/ |_||___/ |_| |_| |_| \__, | |___/ _ _ ___ (_) __ _ _ __ __ _ | |_ _ _ _ __ ___ / __|| | / _` || '_ \ / _` || __|| | | || '__|/ _ \ \__ \| || (_| || | | || (_| || |_ | |_| || | | __/ |___/|_| \__, ||_| |_| \__,_| \__| \__,_||_| \___| |___/ Artistic Iron Design |
#10
Posted to rec.crafts.metalworking
|
|||
|
|||
Right angle drives, for drilling?
artisticirondesign wrote:
Maybe you can get more ideas from proffessionals or you may also hire someone to do that for you ( professional of course) you may call in Artistic Iron Design specializes in providing high quality services. Do you actually think that you're going to generate any business by posting this crap? All you're doing is annoying people. People who might otherwise visit your site will not now. Bob |
#11
Posted to rec.crafts.metalworking
|
|||
|
|||
Right angle drives, for drilling?
John Doe wrote in
rec.crafts.metalworking on 02 Feb 2011 02:47:44 GMT: Right angle drives, for drilling?Specifically, the inexpensive Vermont American 17172. Will it support an 18 V cordless drill? Milwaukee makes a heavy duty version, part number 48-06-2871, and a lighter duty version 49-22-8510. Any other right angle drives/gearing that will support the power of a Bosch/DeWalt 18V cordless drill? Thanks. I have a right angle attachment I got from Harbor Freight that works good. Cost around $10.00 on sale. The flats on the input shank had some run out, but I cleaned that up on a surface grinder. When I had it apart it looked like it would hold up. I've used it in close quarters with 1.250 spade bits and for driving screws. -- Dan H. northshore MA. |
#12
Posted to rec.crafts.metalworking
|
|||
|
|||
Right angle drives, for drilling?
notme privacy.net (dan) wrote:
I have a right angle attachment I got from Harbor Freight I cannot take advantage of Communist Chinese slave labor while putting my fellow countrymen out of work. Obviously some people think that Communist Chinese slave labor is okay. Not actually owning the slaves makes them feel good about sending their money to Communist Chinese dictators, but they have essentially the same mentality that the slave owners have. -- that works good. Cost around $10.00 on sale. The flats on the input shank had some run out, but I cleaned that up on a surface grinder. When I had it apart it looked like it would hold up. I've used it in close quarters with 1.250 spade bits and for driving screws. |
#13
Posted to rec.crafts.metalworking
|
|||
|
|||
Right angle drives, for drilling?
"John Doe" wrote in message eb.com... notme privacy.net (dan) wrote: I have a right angle attachment I got from Harbor Freight I cannot take advantage of Communist Chinese slave labor while putting my fellow countrymen out of work. Obviously some people think that Communist Chinese slave labor is okay. Not actually owning the slaves makes them feel good about sending their money to Communist Chinese dictators, but they have essentially the same mentality that the slave owners have. Are you on drugs, or just stupid? |
#14
Posted to rec.crafts.metalworking
|
|||
|
|||
Right angle drives, for drilling?
On Wed, 2 Feb 2011 17:52:58 -0800, "Steve B"
wrote: "John Doe" wrote in message web.com... notme privacy.net (dan) wrote: I have a right angle attachment I got from Harbor Freight I cannot take advantage of Communist Chinese slave labor while putting my fellow countrymen out of work. Obviously some people think that Communist Chinese slave labor is okay. Not actually owning the slaves makes them feel good about sending their money to Communist Chinese dictators, but they have essentially the same mentality that the slave owners have. Are you on drugs, or just stupid? Wasn't he the shop steward for the millwrights' union a while back? Gerry :-)} London, Canada |
#15
Posted to rec.crafts.metalworking
|
|||
|
|||
Right angle drives, for drilling?
"Gerald Miller" wrote in message ... On Wed, 2 Feb 2011 17:52:58 -0800, "Steve B" wrote: "John Doe" wrote in message aweb.com... notme privacy.net (dan) wrote: I have a right angle attachment I got from Harbor Freight I cannot take advantage of Communist Chinese slave labor while putting my fellow countrymen out of work. Obviously some people think that Communist Chinese slave labor is okay. Not actually owning the slaves makes them feel good about sending their money to Communist Chinese dictators, but they have essentially the same mentality that the slave owners have. Are you on drugs, or just stupid? Wasn't he the shop steward for the millwrights' union a while back? Gerry :-)} London, Canada I think they made him business agent ..................... Steve |
#16
Posted to rec.crafts.metalworking
|
|||
|
|||
Right angle drives, for drilling?
On 03 Feb 2011 00:59:00 GMT, John Doe wrote:
notme privacy.net (dan) wrote: I have a right angle attachment I got from Harbor Freight I cannot take advantage of Communist Chinese slave labor while putting my fellow countrymen out of work. Obviously some people think that Communist Chinese slave labor is okay. Not actually owning the slaves makes them feel good about sending their money to Communist Chinese dictators, but they have essentially the same mentality that the slave owners have. What are the odds the $25 VA drill attachment is *not* made in China? -- Ned Simmons |
#17
Posted to rec.crafts.metalworking
|
|||
|
|||
Right angle drives, for drilling?
On Thu, 03 Feb 2011 00:51:12 -0500, Ned Simmons
wrote: On 03 Feb 2011 00:59:00 GMT, John Doe wrote: notme privacy.net (dan) wrote: I have a right angle attachment I got from Harbor Freight I cannot take advantage of Communist Chinese slave labor while putting my fellow countrymen out of work. Obviously some people think that Communist Chinese slave labor is okay. Not actually owning the slaves makes them feel good about sending their money to Communist Chinese dictators, but they have essentially the same mentality that the slave owners have. What are the odds the $25 VA drill attachment is *not* made in China? Or the odds that anything isn't made in China these days. |
#18
Posted to rec.crafts.metalworking
|
|||
|
|||
Right angle drives, for drilling?
On 03 Feb 2011 00:59:00 GMT, John Doe wrote:
notme privacy.net (dan) wrote: I have a right angle attachment I got from Harbor Freight I cannot take advantage of Communist Chinese slave labor while putting my fellow countrymen out of work. Obviously some people think that Communist Chinese slave labor is okay. Not actually owning the slaves makes them feel good about sending their money to Communist Chinese dictators, but they have essentially the same mentality that the slave owners have. Interesting. Hadn't heard that old saw in a few years, not since a lot of US businesses moved off shore and Americans started visiting China. I'm not sure where any Chinese prisons are actually in the manufacturing business but all those thousands of bicycle riders, and increasingly motorcycle riders are not slaves. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Drilling Angle Iron Problem | Home Repair | |||
Question on drilling and cutting angle | Metalworking | |||
Brace/support for right-angle drilling into wood | Woodworking | |||
accurate drilling at an angle? | Metalworking | |||
Drilling on an angle | Metalworking |