Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
high speed spindle
I have realized that I already have a router called Bosch 1617EVS:
http://www.amazon.com/Bosch-1617EVS-...dp/B00004TKHV/ This is a real "no ****" powerful machine. If I can fit it near the quill, which I cannot see any I couldn't, it would work very well. Its speed range is 8,000 to 25,000 RPM, which is somewhat better than 16,000 to 30,000 of the "palm router". It has 1/2" and 1/4" collets, and smaller collets are also available from, e.g., http://gpcollets.com/bsch_cross.html...FRQWawodhCDwTA If I can fit it next to the quill, it will be a very decent setup. All I would need to do is make an adapter plate. i |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
High speed spindle | Metalworking | |||
PING: GUNNER- High-Speed Spindle | Metalworking | |||
At what speed do I check my spindle runout | Metalworking | |||
Musing about spindle speed | Woodturning | |||
Spindle turning Speed | Woodturning |