Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 3,055
Default Chaps my ass

Down at the corner where we get off the freeway is a new stop sign. The old
one, still in perfect condition is laying on the ground beside it. I bet
tomorrow, it has been run over by a dozer, or crumpled by a backhoe with a
thumb bucket. Those things have to be $500 when all is said and done. Why
couldn't they use the old one (that looks new) and not have to have a new
one and destroy the old one so it can't be used somewhere else? I might
make a midnight run tonight ................

Steve

visit my blog at http://cabgbypasssurgery.com


  #2   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 199
Default Chaps my ass

On Mon, 16 Aug 2010 19:48:35 -0700, "Steve B"
wrote:

Down at the corner where we get off the freeway is a new stop sign. The old
one, still in perfect condition is laying on the ground beside it. I bet
tomorrow, it has been run over by a dozer, or crumpled by a backhoe with a
thumb bucket. Those things have to be $500 when all is said and done. Why
couldn't they use the old one (that looks new) and not have to have a new
one and destroy the old one so it can't be used somewhere else? I might
make a midnight run tonight ................

Steve

visit my blog at http://cabgbypasssurgery.com


Our street sign was stolen about 5 months ago, yesterday I see they
finally got a new one. They put it up parallel to the main road !

SW
  #3   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 3,055
Default Chaps my ass


"Sunworshipper" wrote in message
...
On Mon, 16 Aug 2010 19:48:35 -0700, "Steve B"
wrote:

Down at the corner where we get off the freeway is a new stop sign. The
old
one, still in perfect condition is laying on the ground beside it. I bet
tomorrow, it has been run over by a dozer, or crumpled by a backhoe with a
thumb bucket. Those things have to be $500 when all is said and done.
Why
couldn't they use the old one (that looks new) and not have to have a new
one and destroy the old one so it can't be used somewhere else? I might
make a midnight run tonight ................

Steve

visit my blog at http://cabgbypasssurgery.com


Our street sign was stolen about 5 months ago, yesterday I see they
finally got a new one. They put it up parallel to the main road !

SW


They have three more ways they can put it mathematically. I bet it takes
them all three trips.

I wonder seriously if there is any drug testing in these agencies, or if
it's like union work. They get extra points from the guys.

"Hey, how many trip tickets does it take to put up a stop sign?"

"Who cares? You got a problem with that?"

Steve

visit my blog at http://cabgbypasssurgery.com


  #4   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 130
Default Chaps my ass

On 8/16/2010 11:59 PM, Steve B wrote:
wrote in message
...
On Mon, 16 Aug 2010 19:48:35 -0700, "Steve B"
wrote:

Down at the corner where we get off the freeway is a new stop sign. The
old
one, still in perfect condition is laying on the ground beside it. I bet
tomorrow, it has been run over by a dozer, or crumpled by a backhoe with a
thumb bucket. Those things have to be $500 when all is said and done.
Why
couldn't they use the old one (that looks new) and not have to have a new
one and destroy the old one so it can't be used somewhere else? I might
make a midnight run tonight ................

Steve

visit my blog at http://cabgbypasssurgery.com


Our street sign was stolen about 5 months ago, yesterday I see they
finally got a new one. They put it up parallel to the main road !

SW


They have three more ways they can put it mathematically. I bet it takes
them all three trips.

I wonder seriously if there is any drug testing in these agencies, or if
it's like union work. They get extra points from the guys.

"Hey, how many trip tickets does it take to put up a stop sign?"

"Who cares? You got a problem with that?"

Steve

visit my blog at http://cabgbypasssurgery.com



Yep.. They installed a bus stop right in front of our shop. About 30 ft
long, with a guard rail so ppl don't fall back into the ditch. It took
them at least 10-15 trips just to install the rail.. thats not including
how long it actually took them to pour the concrete.

Our tax dollars hard at work there.. heh

  #5   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 756
Default Chaps my ass

Sunworshipper wrote:
On Mon, 16 Aug 2010 19:48:35 -0700, "Steve B"
wrote:

Down at the corner where we get off the freeway is a new stop sign. The old
one, still in perfect condition is laying on the ground beside it. I bet
tomorrow, it has been run over by a dozer, or crumpled by a backhoe with a
thumb bucket. Those things have to be $500 when all is said and done. Why
couldn't they use the old one (that looks new) and not have to have a new
one and destroy the old one so it can't be used somewhere else? I might
make a midnight run tonight ................

Steve

visit my blog at http://cabgbypasssurgery.com


Our street sign was stolen about 5 months ago, yesterday I see they
finally got a new one. They put it up parallel to the main road !


Hah. Reminds me of when they put in a new shopping
center near my house. They first put up the street
lights, then hung the sloping horizontal signal pole
arms for the stoplights. I couldn't figure out why
the stoplights didn't line up with the lanes on the
road.

They had hung the signal poles on the wrong sides
of the street. The eastbound side of the street had
a left turn lane and the west bound side had a right
turn lane.

So on the westbound side, they mounted a signal pole
arm with positions for a left turn and straight, and
placed straight and right turn signals on it.

On the eastbound side, they mounted a signal pole arm
with positions for straight and right turn and mounted
left turn and straight signals on it.

My wife couldn't stop laughing when I pointed it out
to her...

It's been about 20 years and it's never been fixed.


  #6   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 223
Default Chaps my ass

The sign says: " | "?

--
Christopher A. Young
Learn more about Jesus
www.lds.org
..


"Sunworshipper" wrote in message
...


Our street sign was stolen about 5 months ago, yesterday I see they
finally got a new one. They put it up parallel to the main road !

SW


  #7   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 199
Default Chaps my ass

On Tue, 17 Aug 2010 22:08:22 -0400, "Stormin Mormon"
wrote:

The sign says: " | "?



Very good description.

I should take advantage of the situation and fix it, then take two
2lb. hammers and expand the threads so it won't disappear so easily
next time.

SW
  #8   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 189
Default Chaps my ass

On Aug 17, 12:48*pm, "Steve B" wrote:

*I might make a midnight run tonight ................

Steve

visit my blog athttp://cabgbypasssurgery.com


Hey - I long ago gave up looking for rationality in these things -
just view it as an opportunity to get some nice thick aluminium
plate.......

Andrew VK3BFA.

(sigh...I miss having a truck or van, so many cool things going
begging....)
  #9   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 270
Default Chaps my ass

Andrew VK3BFA wrote:

Hey - I long ago gave up looking for rationality in these things -
just view it as an opportunity to get some nice thick aluminium
plate.......

Andrew VK3BFA.


We have some "sign" material at school and I went to use a bit
of it some time ago. What a pain to get the plastic coat that
contains the color/text off. That must be the ultimate atach
method. The aluminum was pretty soft and the plastic was almost
stiffer than the metal. :-)
...lew...
  #10   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 3,055
Default Chaps my ass


"Andrew VK3BFA" wrote in message
...
On Aug 17, 12:48 pm, "Steve B" wrote:

I might make a midnight run tonight ................

Steve

visit my blog athttp://cabgbypasssurgery.com


Hey - I long ago gave up looking for rationality in these things -
just view it as an opportunity to get some nice thick aluminium
plate.......

Andrew VK3BFA.

(sigh...I miss having a truck or van, so many cool things going
begging....)

We have a problem with ATV riders riding along one side of out property. I
went to City Hall in our tiny town, and asked if they had anything I could
post. The guy said sure, and took me to the garage in back. He gave me for
free, an 8' pressure treated 4 x 4 and a diamond shaped aluminum DEAD END
sign that is 3'+ on each side with reflective face. He said it had been in
their shop for a few years, and they were looking for a place to put it.

Steve

visit my blog at http://cabgbypasssurgery.com




  #11   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1,417
Default Chaps my ass

On Mon, 16 Aug 2010 19:48:35 -0700
"Steve B" wrote:

Down at the corner where we get off the freeway is a new stop sign. The old
one, still in perfect condition is laying on the ground beside it. I bet
tomorrow, it has been run over by a dozer, or crumpled by a backhoe with a
thumb bucket. Those things have to be $500 when all is said and done. Why
couldn't they use the old one (that looks new) and not have to have a new
one and destroy the old one so it can't be used somewhere else? I might
make a midnight run tonight ................


The Road Commission around here has two major objectives:

1 -Look busy, this is a must

2 -Do the job in such a way that you can do it again tomorrow.

You just try and talk some sense into them, they will see to it
that you never make such "fool" comments again...

--
Leon Fisk
Grand Rapids MI/Zone 5b
Remove no.spam for email

  #12   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1,392
Default Chaps my ass

Steve B writes:

Why couldn't they use the old one ...


Lifetime of signs something like 7 years. The reflective material loses
its reflectivity and contrast over time. It might look OK, but higher
visibility does translate into statistical life and property saved.
  #13   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 3,055
Default Chaps my ass


"Richard J Kinch" wrote in message
. ..
Steve B writes:

Why couldn't they use the old one ...


Lifetime of signs something like 7 years. The reflective material loses
its reflectivity and contrast over time. It might look OK, but higher
visibility does translate into statistical life and property saved.


Then I guess they would have no problem with me removing the junk.

Steve

visit my blog at http://cabgbypasssurgery.com
free books while they last


  #14   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 523
Default Chaps my ass

Steve sez: "Then I guess they would have no problem with me removing the junk."

S' ok, Steve. Just be careful you don't wind up in a warm tent like in AZ.

Bob Swinney

  #15   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 362
Default Chaps my ass

On Aug 16, 7:48*pm, "Steve B" wrote:
Down at the corner where we get off the freeway is a new stop sign. *The old
one, still in perfect condition is laying on the ground beside it. *I bet
tomorrow, it has been run over by a dozer, or crumpled by a backhoe with a
thumb bucket. *Those things have to be $500 when all is said and done. *Why
couldn't they use the old one (that looks new) and not have to have a new
one and destroy the old one so it can't be used somewhere else? *I might
make a midnight run tonight ................

Steve

visit my blog athttp://cabgbypasssurgery.com


Trouble is the authorities keep trying to enforce the sign even when
it is lying on the ground, or has completely disappeared. Where we
used to live in Washington, a 20mph school sign had been flat on the
ground for over a year, but driver were still being targeted by school
authorities based on license plates. They reported the speeding cars
to the local sheriff deputy, who cited the driver next time he found
them in the area.

Finally someone in the neighborhood asked the school authorities why
they were doing this and they could not find the sign. All the
citations had to be canceled and fines returned. Very red faced
authorities.

Paul


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
so many chaps and ladies around town surely hoisted a glass to theirdear, respected friend. Some of us, who knew him, and he knew so many, did. [email protected] UK diy 0 April 25th 08 09:38 PM
Thanks Chaps - follow up on RCD issues Dan delaMare-Lyon UK diy 14 June 8th 06 11:58 AM
Cheers Chaps! david lang UK diy 25 January 29th 06 10:36 PM


All times are GMT +1. The time now is 11:10 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"