Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
cement mixer motor suggestions
I bought an old cement mixer. About 24" in diameter, about 24" deep. Old,
old, old. Has new big pulley on the end of shaft, and motor plate. What horsepower would you recommend so as to handle a good days work, and not overload it or kick the 20 amp breaker? I believe I can do with a one speed one direction motor. They are all over the map from $150 to $700. I do have 220v. available, too. Steve |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
My Cement mixer. | UK diy | |||
Cement mixer motor | Metalworking | |||
Electric Motor Problem on a Cement Mixer | UK diy | |||
Cement Mixer Electric Motor Problem | UK diy | |||
HF cement mixer | Metalworking |