Teach me about cutoff blades. The slot in the BXA size holder
measures 5/8" (actually 11/32") so it could take a 5/8 by 1/8 cutoff
tool, but it would be nice to use a narrower cutoff blade. What's the
smallest size that can be used in the standard BXA size cutoff tool
holder? Get the T type, tapered type or straight type of cutoff
blade? What's a good place to buy cutoff blades?

RWL

the blade size is specified in the Aloris catalog that you can DL from their
web site - 11/32nds sounds right - but check the catalog - if you have an
import, your needs may vary

GeoLane at PTD dot NET wrote in message
...
Teach me about cutoff blades. The slot in the BXA size holder
measures 5/8" (actually 11/32") so it could take a 5/8 by 1/8 cutoff
tool, but it would be nice to use a narrower cutoff blade. What's the
smallest size that can be used in the standard BXA size cutoff tool
holder? Get the T type, tapered type or straight type of cutoff
blade? What's a good place to buy cutoff blades?

RWL

Enco or MSC. Look for the parts for sale like you have and look for
replacements.

Martin

Martin H. Eastburn
@ home at Lions' Lair with our computer lionslair at consolidated dot net
"Our Republic and the Press will Rise or Fall Together": Joseph Pulitzer
TSRA: Endowed; NRA LOH & Patron Member, Golden Eagle, Patriot's Medal.
NRA Second Amendment Task Force Charter Charter Founder
IHMSA and NRA Metallic Silhouette maker & member. http://lufkinced.com/

On 6/23/2010 9:27 PM, GeoLane at PTD dot NET wrote:
Teach me about cutoff blades. The slot in the BXA size holder
measures 5/8" (actually 11/32") so it could take a 5/8 by 1/8 cutoff
tool, but it would be nice to use a narrower cutoff blade. What's the
smallest size that can be used in the standard BXA size cutoff tool
holder? Get the T type, tapered type or straight type of cutoff
blade? What's a good place to buy cutoff blades?

RWL

GeoLane at PTD dot NET wrote in message
...
Teach me about cutoff blades. The slot in the BXA size holder
measures 5/8" (actually 11/32") so it could take a 5/8 by 1/8 cutoff
tool, but it would be nice to use a narrower cutoff blade. What's the
smallest size that can be used in the standard BXA size cutoff tool
holder? Get the T type, tapered type or straight type of cutoff
blade? What's a good place to buy cutoff blades?

RWL


I just grind to whatever width I want. Cut-off is black magic, burry
chicken guts during a full moon while burning black candles while chanting.

On 2010-06-24, Buerste wrote:

GeoLane at PTD dot NET wrote in message
...
Teach me about cutoff blades. The slot in the BXA size holder
measures 5/8" (actually 11/32") so it could take a 5/8 by 1/8 cutoff
tool, but it would be nice to use a narrower cutoff blade. What's the
smallest size that can be used in the standard BXA size cutoff tool
holder? Get the T type, tapered type or straight type of cutoff
blade? What's a good place to buy cutoff blades?

Well ... I use a T-type blade in the BXA-sized holder by
Phase-II. That blade is:

11/16"x 1/8" x5" Cleveland Mo-Max M-33 Cobalt

and generally works well for me. (But a search by the MSC part number
no longer finds it so I need to find another maker.

Are you sure about your 11/32" measurement? That is rather tiny
for a lathe large enough to use a BXA toolpost.

RWL


I just grind to whatever width I want. Cut-off is black magic, burry
chicken guts during a full moon while burning black candles while chanting.

I don't have a ready source for chicken guts, so I depend on
luck. :-)

Good Luck,
DoN.

--
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---