Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Fixed! Tachometer on Clausing VS13 Lathe
after quite a bit of research, consulting with a friend who's an
electronics geek, etc. the tachometer on my Clausing is fixed! The opto sensor and the LCD needed to be replaced, and suitable parts were found at Digikey, but there was still a nasty intermittent problem happening. finally diagnosed it down to a overheating diode in the power supply. works like a champ now. --Joel -- remove "xxxnospamxxx" to reach me |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Lubrication for a Clausing VS13 lathe | Metalworking | |||
Clausing lathe oil | Metalworking | |||
$850 for Clausing 8530 mill + Clausing 2' lathe? | Metalworking | |||
Pictures of Clausing 8530 mill and clausing lathe! | Metalworking | |||
Clausing Lathe, but OT | Metalworking |