What's the going price for a KO Lee tool & cutter grinder with some
tooling?
Specifically it's a Model 960 from probably 1966. The head does not
tilt and the ways are V ways, not ball bearings. The known tooling is
an "air bearing" fixture to sharpen end mills. There probably is a
fixture to turn lathe centers. Not sure what else is there. It's
coming out of a shop that's closing. I have not seen it yet, but hope
to do that Friday. eBay is no help - dealers listing machines at
inflated prices that never sell. Second,what do you think the odds
are that there would be a small clientelle of hobbyists that want
things sharpened so that I could pay for this thing over time? We all
see old end mills, taps and other cutting tools at flea markets that
are dull but would work if resharpened. I'm not thinking of making a
lot of money, but maybe $2 to $5 a cutter on average.

RWL

On Tue, 12 Jan 2010 05:34:52 -0800 (PST), RWL wrote:

What's the going price for a KO Lee tool & cutter grinder with some
tooling?
Specifically it's a Model 960 from probably 1966. The head does not
tilt and the ways are V ways, not ball bearings. The known tooling is
an "air bearing" fixture to sharpen end mills. There probably is a
fixture to turn lathe centers. Not sure what else is there. It's
coming out of a shop that's closing. I have not seen it yet, but hope
to do that Friday. eBay is no help - dealers listing machines at
inflated prices that never sell. Second,what do you think the odds
are that there would be a small clientelle of hobbyists that want
things sharpened so that I could pay for this thing over time? We all
see old end mills, taps and other cutting tools at flea markets that
are dull but would work if resharpened. I'm not thinking of making a
lot of money, but maybe $2 to $5 a cutter on average.

RWL

Sorry to have been away in LA. Did ya get it?

Gunner

"I am for doing good to the poor, but I differ in opinion of the
means. I think the best way of doing good to the poor, is not
making them easy in poverty, but leading or driving them out of
it. In my youth I travelled much, and I observed in different
countries, that the more public provisions were made for the
poor the less they provided for themselves, and of course became
poorer. And, on the contrary, the less was done for them, the
more they did for themselves, and became richer." -- Benjamin
Franklin, /The Encouragement of Idleness/, 1766

On Sun, 17 Jan 2010 13:44:52 -0800, Gunner Asch
wrote:

On Tue, 12 Jan 2010 05:34:52 -0800 (PST), RWL wrote:

What's the going price for a KO Lee tool & cutter grinder with some
tooling?


RWL

Sorry to have been away in LA. Did ya get it?

Gunner

Nope. The seller cancelled the visit when I told him I was thinking
in the $500 range and his starting price was $3000. His isn't the
only machine in the US.

RWL

On Sun, 17 Jan 2010 17:46:05 -0500, GeoLane at PTD dot NET GeoLane at
PTD dot NET wrote:

On Sun, 17 Jan 2010 13:44:52 -0800, Gunner Asch
wrote:

On Tue, 12 Jan 2010 05:34:52 -0800 (PST), RWL wrote:

What's the going price for a KO Lee tool & cutter grinder with some
tooling?


RWL

Sorry to have been away in LA. Did ya get it?

Gunner

Nope. The seller cancelled the visit when I told him I was thinking
in the $500 range and his starting price was $3000. His isn't the
only machine in the US.

RWL


Sounds like he is living in a very sheltered location..or his own
private fantasy world. Or the thing is brand new. Shrug

Which part of the US do you live in? Ill look around a bit.

Gunner

"I am for doing good to the poor, but I differ in opinion of the
means. I think the best way of doing good to the poor, is not
making them easy in poverty, but leading or driving them out of
it. In my youth I travelled much, and I observed in different
countries, that the more public provisions were made for the
poor the less they provided for themselves, and of course became
poorer. And, on the contrary, the less was done for them, the
more they did for themselves, and became richer." -- Benjamin
Franklin, /The Encouragement of Idleness/, 1766

Nope. The seller cancelled the visit when I told him I was thinking
in the $500 range and his starting price was $3000. His isn't the
only machine in the US.

RWL


Sounds like he is living in a very sheltered location..or his own
private fantasy world. Or the thing is brand new. Shrug

Which part of the US do you live in? Ill look around a bit.

Gunner

Thanks, but probably not economically feasible. I'm in central PA. I
don't see them very often on the Craigslists near me, but they do show
up.
The guy that cancelled the visit lived outside Philadelphia. A dealer
in the Scranton area gave me a rough quote of $1500 for a tooled
K.O.Lee that he's waiting to arrive when the riggers get it out of the
factory.

RWL

On 2010-01-18, GeoLane at PTD dot NET GeoLane wrote:

Nope. The seller cancelled the visit when I told him I was thinking
in the $500 range and his starting price was $3000. His isn't the
only machine in the US.

RWL


Sounds like he is living in a very sheltered location..or his own
private fantasy world. Or the thing is brand new. Shrug

Which part of the US do you live in? Ill look around a bit.

Gunner

Thanks, but probably not economically feasible. I'm in central PA. I
don't see them very often on the Craigslists near me, but they do show
up.
The guy that cancelled the visit lived outside Philadelphia. A dealer
in the Scranton area gave me a rough quote of $1500 for a tooled
K.O.Lee that he's waiting to arrive when the riggers get it out of the
factory.

I have never found a way to get such sellers back in touch with
reality. Fortunately, with enough looking, you can find truly great
deals.

i

On Sun, 17 Jan 2010 23:20:04 -0500, GeoLane at PTD dot NET GeoLane at
PTD dot NET wrote:


Nope. The seller cancelled the visit when I told him I was thinking
in the $500 range and his starting price was $3000. His isn't the
only machine in the US.

RWL


Sounds like he is living in a very sheltered location..or his own
private fantasy world. Or the thing is brand new. Shrug

Which part of the US do you live in? Ill look around a bit.

Gunner

Thanks, but probably not economically feasible. I'm in central PA. I
don't see them very often on the Craigslists near me, but they do show
up.
The guy that cancelled the visit lived outside Philadelphia. A dealer
in the Scranton area gave me a rough quote of $1500 for a tooled
K.O.Lee that he's waiting to arrive when the riggers get it out of the
factory.

RWL

Mine has the air floated endmill/drill sharpener, the second motorized
turning fixture and something else I cant remember..a big fixture of
some sort. Got about 50 wheels of all sorts, cups, various other
wheels, diamond..oh..also got a electric magnetic chuck as well, but
since I have the big 618 surface grinder..never use it.

Gunner

"I am for doing good to the poor, but I differ in opinion of the
means. I think the best way of doing good to the poor, is not
making them easy in poverty, but leading or driving them out of
it. In my youth I travelled much, and I observed in different
countries, that the more public provisions were made for the
poor the less they provided for themselves, and of course became
poorer. And, on the contrary, the less was done for them, the
more they did for themselves, and became richer." -- Benjamin
Franklin, /The Encouragement of Idleness/, 1766