Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Motor HP as function of VFD frequency
If I run a motor from a VFD at a higher than 60 Hz frequency, it would
decrease its output power. This is all fine, but I would like to see some graphs as to how much it loses its power if I overspeed it by 2 times (such as running a 1800 RPM motor at 3600 RPM). Does anyone have a such a graph? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
UPS function | Electronics | |||
UPS function | Electronics Repair | |||
ALPS motor/servo function selector switch | Electronics Repair | |||
sony mdp 315 no function | Electronics Repair | |||
can a CRT function on it's side? | Electronics Repair |