 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
The Trend Toward Thread Milling in Hardened Material
"T.Alan Kraus" wrote:
That's all good info, but how do I thread mill on a manual machine? I bet there are quite a few people on rcm that have cnc mills. Might be a converted bridgeport or X3 type machine. Perfectly on topic Bob. Wes |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Thread Milling | Metalworking | |||
| Questions regarding thread diameter and pitch for special design case with limited thread length | Metalworking | |||
| THREAD MILLING | Metalworking | |||
| Musing about up milling, down milling, shearing and scraping. | Woodturning | |||
| dremel sized milling bit for cylinder head gasket material | Metalworking | |||
![Wes[_2_] is offline](https://www.diybanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Threaded Mode
