 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Another question, induction motors on 50hz, limited duty
On Tue, 24 Nov 2009 18:05:41 -0800, Jon Anderson wrote:
But... I've been told several times that AC brush motors run fine on 50hz, just a bit slower. If it has brushes, the frequency of the supply is irrelevant - they'll even run on DC! (If it's shunt-wound, then all bets are off.) Hope This Helps! Rich |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Another question, induction motors on 50hz, limited duty | Metalworking | |||
| Another question, induction motors on 50hz, limited duty | Metalworking | |||
| Another question, induction motors on 50hz, limited duty | Metalworking | |||
| Another question, induction motors on 50hz, limited duty | Metalworking | |||
| Induction Motors and Broadband Routers | UK diy | |||
Linear Mode
