Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Welding on a fuel tank (jerry can)
On Nov 23, 11:12*am, RLM wrote:
On Mon, 23 Nov 2009 10:07:17 -0600, Ignoramus25468 wrote: I would like to convert a 5 gallon steel jerry can into a fuel tank to hold diesel fuel. To that end, I will need to add three fittings to it (fuel intake with tube almost to the bottom, fuel return, and breather fitting). Presently this jerry can contains diesel fuel. The way I want it done is to drill holes in the top of the can for the three aforementioned fittings, and TIG weld them on. To avoid explosion, my plan is to drain all diesel fuel from the jerry can, and fill it with water almost to the top, so that ony very little space is left between water and where I will drill and weld. Would that be a basically safe thing to do. thanks i Add baking soda to the water. I have brazed a VW fuel tank this way. I have stick welded a gas tank on a forklift that was part of the frame by filling the tank to the top with gas and catching the overflow from expansion in a pan of floor dry as I welded. Heh, I had to drill a hole in a motorcycle gas tank to enlarge a breather hole in the collar that went down into the tank a bit to help stop gas from rushing out after a crash (I assume that is what it was for). Did it with the tank filled to the brim with gas, with a wet rag ready to just plop down onto the filler opening if the drill bit or the brushes ignited the fumes. Dave |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Welding on a fuel tank (jerry can) | Metalworking | |||
Fuel Tank | Metalworking | |||
Fuel leak where line enters fuel tank | Home Repair | |||
FA - for all you old engine types - Adapter to use Jerry Can as fuel tank Mil Surplus | Metalworking | |||
fuel oil tank | Home Repair |