Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
FOLLOWUP -- IT WORKS -- Help with motor capacitor wiring
John, the new capacitor from McMaster arrived in the mail, after
installing it the motor almost jumped on the table, and runs great. 10 minutes later, the compressor was reassembled and oil put in the crankcase. A fun little story. i On 2009-11-06, Jon Elson wrote: Ignoramus8745 wrote: Picked up a "2.98 kW" (4 HP?) 60 gallon Speedaire compressor with a self described "bad motor" for $50. I am kinda hoping that the motor is not actually bad. So, have you tried it, yet? What happened? Jon |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Help with motor capacitor wiring | Metalworking | |||
Followup -- How do you test a DC servo motor | Metalworking | |||
Capacitor Start, Capacitor Run Motor | Electronics Repair | |||
What type of AC motor have I got? capacitor start motor? | Home Repair |