Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
high temp thread lubrication?
Grant wrote:
These cookers have a recurrent problem with stuck top dampers. I am sure that some kind of anti-sieze or hi-temp grease must exist that will work. I tried to use Super Lube once as a flux for casting bullets. Silicone based I think. Just sat there in my casting pot. http://www.super-lube.com/ Wes |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
high temp thread lubrication?
On Fri, 04 Sep 2009 18:51:04 -0400, the infamous Wes
scrawled the following: Grant wrote: These cookers have a recurrent problem with stuck top dampers. I am sure that some kind of anti-sieze or hi-temp grease must exist that will work. I tried to use Super Lube once as a flux for casting bullets. Silicone based I think. Just sat there in my casting pot. http://www.super-lube.com/ Oh, that's the stuff I was thinking of, not Tri-Flow. I like Super-Lube better. It's like a white lithium spray grease on steroids. It was thick and lasted forever. -- It's a great life...once you weaken. --author James Hogan |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
High temp silicone | UK diy | |||
High Temp powder coating | Metalworking | |||
High temp. connectors? | Electronics Repair | |||
High temp. connectors? | Electronics Repair | |||
Homebuilding High Temp Furnace. | Metalworking |