Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
H7527 6" Rotary Table suprise
I was looking at clamping down a 4x4.75 inch plate to my H7527 rotary
table, and decided to get some different hold downs. I had used the wimpy 8mm bolts, and just fer snorts n giggles, I measured the slot width. 0.422... Looked at my chart... 3/8ths... For those using this table, the 3/8 x 16 stuff you have works. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
For Sale or Trade: 8" Super Index horizontal/vertical rotary table (with 3-jaw chuck) for milling machine | Metalworking | |||
Phase II 6" Rotary Table Indexing - Dividing Plate Set | Metalworking | |||
Rotary tool bit for cutting crosswise through 1/16" - 1/8" thick aluminum? | Metalworking | |||
Rotary table - how do they make a "quick-adjust feature"? | Metalworking | |||
Rotary table help. | Metalworking |