http://milwaukee.craigslist.org/tls/1236015122.html

Complete No Bake Sand Foundry Capable of Casting Aluminum, Magnesium,
Brass & Gray Iron.

All Equipment Like New Condition. Prototype Use Only
All equipment is like new condition. This foundry was set up for
prototype support.
Not pictured are two types of flux for melting magnesium, 50lbs of
Tibor and misc tooling.
These items are located in Brookfield Wisconsin


McEnglevan Industrial Natural Gas Furnace Model B1501 Electronic
Ignition- capable of melting aluminum, brass and Gray Cast Iron 115 -
220 V blower.

Steel melting crucible with pouring apparatus. Two crucibles included
constructed from 1/2" steel.

Bremond Portable Rotary Degassing Unit used to remove hydrogen gas
from molten aluminum.
24" lance 5 extra lances included. Unit is air operated capable of
degassing 40 -3000 Lbs.

Reduced Atmosphere Testing Systems (Rats) Model 401 used to test
aluminum samples for porosity

Special gas mixing unit required for magnesium pouring. Regulators are
for Nitrogen, CO2 and SF6 gas.

Portable Pyrometer W / 43" wand and replacement thermocouples
included. Temperature range -
326 F to 2498F accuracy plus minus 1 degree F/C selectable battery
operated

Miscellaneous thongs, ladles

Pig molds used to pour off molten material and dross pan for slag

Three sets of aluminum coated heat reflective clothing.
Hood, gloves, jacket, pants and shoe protectors.
Sizes X large / large

Palmer M100 high speed direct drive No Bake Sand Mixer W / new control
valves.
Power - 480 V 3 Phase

Ten Gallons each sealed - Pep Set 1000 - Pep Set 2000 & Catalysts

50 Feet of rolling racks two ten foot sections x 24" wide two ten foot
sections 18" wide and two five foot sections 24" wide

Free Standing Overhead Gantry 16' x 20" 3000Lbs capacity, hoist not
included

Lindberg Box Style Electric Oven 1100C Max temperature.
Internal dimensions are 24" x 18" x 36 Model 52561-AD1-H200 480 V 3
Phase

One ton of new foundry sand 100 grit still sealed in plastic bag.

Priced to sell - $40,000 OBO

Contact Information -
Tim Kenney
Email
Phone 262-783-8276 Cell 262-527-7250

Many pictures available

One ton of new foundry sand 100 grit still sealed in plastic bag.

I just want to see the plastic bag!!!

Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Flagship Site: http://www.Drill-N-Tap.com
VIDEOS: http://www.youtube.com/user/autodrill

V8013-R

"Joe AutoDrill" wrote in message
...
One ton of new foundry sand 100 grit still sealed in plastic bag.

I just want to see the plastic bag!!!

Disregard... A search for "super sack" on Google led me to a plastic bag
that will indeed hold 2000 lbs. of sand. Holy cow...

The funny thing is I found it via a 900+ lb. bag of kiyy litter... LOL..

http://www.ultimatepetproducts.com/m...ry_Code=litter
--


Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Flagship Site: http://www.Drill-N-Tap.com
VIDEOS: http://www.youtube.com/user/autodrill

V8013-R

"Joe AutoDrill" wrote in message
...
"Joe AutoDrill" wrote in message
...
One ton of new foundry sand 100 grit still sealed in plastic bag.

I just want to see the plastic bag!!!

Disregard... A search for "super sack" on Google led me to a plastic bag
that will indeed hold 2000 lbs. of sand. Holy cow...

The funny thing is I found it via a 900+ lb. bag of kiyy litter... LOL..

You wouldn't want to meet the cat that needed that, in a dark alley.

--
Ed Huntress

"Ed Huntress" wrote in message
...

"Joe AutoDrill" wrote in message
...
"Joe AutoDrill" wrote in message
...
One ton of new foundry sand 100 grit still sealed in plastic bag.

I just want to see the plastic bag!!!

Disregard... A search for "super sack" on Google led me to a plastic bag
that will indeed hold 2000 lbs. of sand. Holy cow...

The funny thing is I found it via a 900+ lb. bag of kiyy litter... LOL..

You wouldn't want to meet the cat that needed that, in a dark alley.

--
Ed Huntress


lol! jesus christ. the laugh for the day.

b.w.

"Ed Huntress" wrote:

The funny thing is I found it via a 900+ lb. bag of kiyy litter... LOL..

You wouldn't want to meet the cat that needed that, in a dark alley.

Only if I have my .338 winmag and barnes solids.

Is kitty red or white meat?

Wes
--
"Additionally as a security officer, I carry a gun to protect
government officials but my life isn't worth protecting at home
in their eyes." Dick Anthony Heller

On 2009-06-24, Wes wrote:
"Ed Huntress" wrote:

The funny thing is I found it via a 900+ lb. bag of kiyy litter... LOL..

You wouldn't want to meet the cat that needed that, in a dark alley.

Only if I have my .338 winmag and barnes solids.

Is kitty red or white meat?

Those sorts of cats jump at you from behing, and by that time it would
be too late to reach for a gun.

i

Ignoramus28618 wrote:

Is kitty red or white meat?

Those sorts of cats jump at you from behing, and by that time it would
be too late to reach for a gun.


Walk with me, backwards.

On 2009-06-24, Wes wrote:
Ignoramus28618 wrote:

Is kitty red or white meat?

Those sorts of cats jump at you from behing, and by that time it would
be too late to reach for a gun.


Walk with me, backwards.

Or you can get a dog like this one:

http://z.about.com/d/urbanlegends/1/...est_dog_sm.jpg

"Wes" wrote in message
...
"Ed Huntress" wrote:

The funny thing is I found it via a 900+ lb. bag of kiyy litter...
LOL..

You wouldn't want to meet the cat that needed that, in a dark alley.

Only if I have my .338 winmag and barnes solids.

Is kitty red or white meat?

Wes

Bobcat supposedly tastes like...chicken. I would assume that domestic cat is
similar, although eating pelletized food or ground mammal lips and
esophagus, or whatever goes into that stuff, may produce a result that's
like farmed talapia versus wild trout (wild trout is exquisite; talapia
tastes like mud).

Ask at your local Chinese takeout. They'll know.

--
Ed Huntress

"Wes" wrote in message
...
Ignoramus28618 wrote:

Is kitty red or white meat?

Those sorts of cats jump at you from behing, and by that time it would
be too late to reach for a gun.


Walk with me, backwards.

Sometime I will tell you about the time I foolishly sat on a mesa-like
plateau in the White Mountain Apache Reservation, watching eagles and
listening to coyotes, until it was too dark to climb down the side and had
to walk down a dry creek bed bordered by cottonwoods, with no flashlight,
and some distant growling sounds...

(Yes, I had a .32 Mag revolver loaded with Silvertips, but that feels as
useful as a pair of nail clippers under the circumstances.)

--
Ed Huntress

"Ignoramus28618" wrote in message
...
On 2009-06-24, Wes wrote:
Ignoramus28618 wrote:

Is kitty red or white meat?

Those sorts of cats jump at you from behing, and by that time it would
be too late to reach for a gun.


Walk with me, backwards.

Or you can get a dog like this one:

http://z.about.com/d/urbanlegends/1/...est_dog_sm.jpg

Believe it or not, they use Airedales as lead dogs when hunting cougars.
They lead a pack of hounds. These are not your housepet Airedales, but the
ones bred for hunting are absolutely fearless.

--
Ed Huntress

"Ed Huntress" wrote in message
...

"Ignoramus28618" wrote in message
...
On 2009-06-24, Wes wrote:
Ignoramus28618 wrote:

Is kitty red or white meat?

Those sorts of cats jump at you from behing, and by that time it would
be too late to reach for a gun.


Walk with me, backwards.

Or you can get a dog like this one:

http://z.about.com/d/urbanlegends/1/...est_dog_sm.jpg

Believe it or not, they use Airedales as lead dogs when hunting cougars.
They lead a pack of hounds. These are not your housepet Airedales, but the
ones bred for hunting are absolutely fearless.

--
Ed Huntress


Airedales may be fearless but they is smart. Lots of the pig hunters in
Calif use Pit Bulls for the dog pack. And Airedale is the leader. HE will
find and harass the pig and then go sit down while the pit bulls attack and
get tore up.

Ed Huntress wrote:
"Wes" wrote in message
...
Ignoramus28618 wrote:

Is kitty red or white meat?

Those sorts of cats jump at you from behing, and by that time it
would be too late to reach for a gun.


Walk with me, backwards.

Sometime I will tell you about the time I foolishly sat on a mesa-like
plateau in the White Mountain Apache Reservation, watching eagles and
listening to coyotes, until it was too dark to climb down the side
and had to walk down a dry creek bed bordered by cottonwoods, with no
flashlight, and some distant growling sounds...

(Yes, I had a .32 Mag revolver loaded with Silvertips, but that feels
as useful as a pair of nail clippers under the circumstances.)

I was sitting outside our camper last summer on our land in the north
central Arkansas Ozarks , listening to the coyotes mutter and yip , almost
like they were talking . Decided it sounded like they were too close for
comfort ... next morning I found tracks less than 50 feet from where I was
sitting .
--
Snag
We have a dog that does that ...
we're pretty sure Goldie
is half coyote .

"Calif Bill" wrote in
m:


"Ed Huntress" wrote in message
...

Believe it or not, they use Airedales as lead dogs when hunting
cougars. They lead a pack of hounds. These are not your housepet
Airedales, but the ones bred for hunting are absolutely fearless.

--
Ed Huntress


Airedales may be fearless but they is smart. Lots of the pig hunters
in Calif use Pit Bulls for the dog pack. And Airedale is the leader.
HE will find and harass the pig and then go sit down while the pit
bulls attack and get tore up.

I grew up with several airedales. My dad was proud of the fact that they
were used to hunt grizzlys and were supposedly the only dog brave enough to
close with one. I never viewed this as sign of intelligence, and the ones
we had were certainly not the brightest dogs I ever dealt with.

Doug White

On Wed, 24 Jun 2009 15:16:35 -0500, the infamous Ignoramus28618
scrawled the following:

On 2009-06-24, Wes wrote:
Ignoramus28618 wrote:

Is kitty red or white meat?

Those sorts of cats jump at you from behing, and by that time it would
be too late to reach for a gun.


Walk with me, backwards.

Or you can get a dog like this one:

http://z.about.com/d/urbanlegends/1/...est_dog_sm.jpg

I'd bet either of my kitties against your doggy any day.


Benjy is my best bet
http://en.wikipedia.org/wiki/File:Ti...ted_levels.jpg
660 pounds and 13 feet long.

or little (500 lb) Sibby my second choice
http://en.wikipedia.org/wiki/File:Siberian_Tiger_sf.jpg

--
Life is not about waiting for the storms to pass;
it's about learning how to dance in the rain.
--Anon

"Larry Jaques" wrote in message
...
On Wed, 24 Jun 2009 15:16:35 -0500, the infamous Ignoramus28618
scrawled the following:



[.......]




I'd bet either of my kitties against your doggy any day.


Benjy is my best bet
http://en.wikipedia.org/wiki/File:Ti...ted_levels.jpg
660 pounds and 13 feet long.


Yeah, but thats including his tail! Pfft.

On Thu, 25 Jun 2009 11:47:36 +0800, the infamous "Dennis"
scrawled the following:


"Larry Jaques" wrote in message
.. .
On Wed, 24 Jun 2009 15:16:35 -0500, the infamous Ignoramus28618
scrawled the following:

[.......]

I'd bet either of my kitties against your doggy any day.

Benjy is my best bet
http://en.wikipedia.org/wiki/File:Ti...ted_levels.jpg
660 pounds and 13 feet long.

Yeah, but thats including his tail! Pfft.

At 660 pounds, he's still considerably larger than that little 300
pound mutt. So there! pffft

I'm so certain that I'll even give odds.

--
Life is not about waiting for the storms to pass;
it's about learning how to dance in the rain.
--Anon

replying to wjr, Rick Lynch wrote:
Do you still have this foundry equipment for sale.

--
posted from
http://www.polytechforum.com/metalwo...le-186656-.htm
using PolyTechForum's Web, RSS and Social Media Interface to
rec.crafts.metalworking and other engineering groups

Rick Lynch fired
this volley in
roups.com:

replying to wjr, Rick Lynch wrote:
Do you still have this foundry equipment for sale.

--
posted from
http://www.polytechforum.com/metalwo...or-sale-186656
-.htm using PolyTechForum's Web, RSS and Social Media Interface to
rec.crafts.metalworking and other engineering groups

You're kidding, right? You don't think in seven years they might have
either sold or disposed of it?

L

"Lloyd E. Sponenburgh" lloydspinsidemindspring.com wrote in message
. 4.170...
Rick Lynch fired
this volley in
roups.com:

replying to wjr, Rick Lynch wrote:
Do you still have this foundry equipment for sale.

--
posted from
http://www.polytechforum.com/metalwo...or-sale-186656
-.htm using PolyTechForum's Web, RSS and Social Media Interface to
rec.crafts.metalworking and other engineering groups

You're kidding, right? You don't think in seven years they might have
either sold or disposed of it?

L

Hey, if you still have that foundry I might be interested. If so you've had
it for seven years, so I expect to just about steal it since nobody wants
it.

LOL

On 2016-04-05, Lloyd E. Sponenburgh lloydspinsidemindspring.com wrote:
Rick Lynch fired
this volley in
roups.com:

replying to wjr, Rick Lynch wrote:
Do you still have this foundry equipment for sale.


You're kidding, right? You don't think in seven years they might have
either sold or disposed of it?

L

I still have access to that message, it was "priced to sell at
$40,000", probably is still available! LMAO

i