http://milwaukee.craigslist.org/tls/1236015122.html
Complete No Bake Sand Foundry Capable of Casting Aluminum, Magnesium,
Brass & Gray Iron.
All Equipment Like New Condition. Prototype Use Only
All equipment is like new condition. This foundry was set up for
prototype support.
Not pictured are two types of flux for melting magnesium, 50lbs of
Tibor and misc tooling.
These items are located in Brookfield Wisconsin
McEnglevan Industrial Natural Gas Furnace Model B1501 Electronic
Ignition- capable of melting aluminum, brass and Gray Cast Iron 115 -
220 V blower.
Steel melting crucible with pouring apparatus. Two crucibles included
constructed from 1/2" steel.
Bremond Portable Rotary Degassing Unit used to remove hydrogen gas
from molten aluminum.
24" lance 5 extra lances included. Unit is air operated capable of
degassing 40 -3000 Lbs.
Reduced Atmosphere Testing Systems (Rats) Model 401 used to test
aluminum samples for porosity
Special gas mixing unit required for magnesium pouring. Regulators are
for Nitrogen, CO2 and SF6 gas.
Portable Pyrometer W / 43" wand and replacement thermocouples
included. Temperature range -
326 F to 2498F accuracy plus minus 1 degree F/C selectable battery
operated
Miscellaneous thongs, ladles
Pig molds used to pour off molten material and dross pan for slag
Three sets of aluminum coated heat reflective clothing.
Hood, gloves, jacket, pants and shoe protectors.
Sizes X large / large
Palmer M100 high speed direct drive No Bake Sand Mixer W / new control
valves.
Power - 480 V 3 Phase
Ten Gallons each sealed - Pep Set 1000 - Pep Set 2000 & Catalysts
50 Feet of rolling racks two ten foot sections x 24" wide two ten foot
sections 18" wide and two five foot sections 24" wide
Free Standing Overhead Gantry 16' x 20" 3000Lbs capacity, hoist not
included
Lindberg Box Style Electric Oven 1100C Max temperature.
Internal dimensions are 24" x 18" x 36 Model 52561-AD1-H200 480 V 3
Phase
One ton of new foundry sand 100 grit still sealed in plastic bag.
Priced to sell - $40,000 OBO
Contact Information -
Tim Kenney
Email
Phone 262-783-8276 Cell 262-527-7250
Many pictures available