Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1
Default Hygia 6.0 Complete Air Purifying System

Price:$299.99
Image: http:///image.php?id=B000ICP3UC
Best deal: http:///index.php?id=B000ICP3UC







As established by the United States EPA, in the last several years, a growing body of scientific evidence has indicated that the air within homes and other buildings can be more seriously polluted than the outdoor air in even the largest and most industrialized cities. Other research indicates that people spend approximately 90 percent of their time indoors. Thus, for many people, the risks to health may be greater due to exposure to air pollution indoors than outdoors. To help create a healthier indoor environment use the Germ Guardian Hygia 6.0 - Complete Air Cleansing System. The Hygia 6.0 offers six stages of air filtration that helps purify the air in your home while destroying germs and odors: A UV light tube Ionizer- emits negative ions (small amount) to enhance the cleaning process Helps to remove smoke and odors from the air Whisper-Quiet Operation CADR Rating Information - Square footage covered - 144; Tobacco Smoke - 95; Dust - 107; Pollen - 129 Filter Replacement - FLT-4000 Unit Dimensions - Length - 8 inches x Width - 16 inches x Height - 20 inches / Weight - 17 lbs 2-Year Limited Warranty Power Supply - 120Vac, 60Hz; Power Consumption - 100 watts; Cord Length - 9 feet





SIMILAR PRODUCTS:

House, M.D. - Season Three:http:///index.php?id=B000R9YLKY
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Thank you- New heating system complete. [email protected] UK diy 0 November 8th 08 11:17 AM
Bar is almost complete Walter H. Klaus Woodworking Plans and Photos 0 May 2nd 07 02:45 AM
Bar is almost complete James \Cubby\ Culbertson Woodworking Plans and Photos 2 March 16th 07 12:37 AM
FS complete pkg Mick1V Woodturning 2 November 13th 04 11:16 AM
thanks all 1st project complete James Schenck Metalworking 9 April 19th 04 03:33 AM


All times are GMT +1. The time now is 02:13 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"