Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Weird hardware request
I've got a project that is calling for internally and externally threaded
stainless tubing. I'm having a hard time finding what I need, so I thought I'd ask here before I draw up a plan and get a quote from a local machine shop. What I need is something like this: | \\ | | // | | // | | \\ | | \\ | | // | | // | | \\ | With the inner hole on the externally threaded tubing being .055-.070 and the thread size being 8-32 (one size up or down would be fine, but 10-32 is pushing it) and the OD of the internally threaded tubing being about 1/4". I need them about 1/2" long, though longer is fine, as I can cut them down to size. I'm looking for about 300-500 of each. Thanks for any help! Also, I'm looking for either split brass tubing, or bead rolled brass strip. It need to go on/around 22ga stainless. Say between 1/8"-1/4" OD. The final effect is something like this: http://www.sunshadowdesign.com/galle...et/duncan2.jpg (Not my work, just found something of similar style) Thansk again! Todd |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Another OT request | UK diy | |||
request | Woodworking | |||
request | Woodworking | |||
request | Electronics Repair | |||
request | Home Repair |