Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
roll tap lubricant
What lubricant should I used to roll tap extruded aluminum in the 4-40
to 1/4-20 range? Thanks in advance. Chuck P. |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
roll tap lubricant
Pilgrim wrote:
What lubricant should I used to roll tap extruded aluminum in the 4-40 to 1/4-20 range? Thanks in advance. Chuck P. I just use plain old oil for #8 and #10 but think an EP would be easier on the torque. ...lew... |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Using ATF as a Way Lubricant | Metalworking | |||
Dassault.Systemes.P3.CATIA.V5R17, GibbsCAM.2006.v8.0.17, Copra Roll Forming v2007, Ubeco Profil Roll Form v4.3, Mazak CPC, FANUC Robotics Simulation, Lantek, AMADA, other ... | UK diy | |||
Building the roll part of a roll top desk | Woodworking | |||
Refinishing roll part of roll top desk | Woodworking | |||
Lubricant | Metalworking |