 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
brass to glass - best adhesive
This is what I'd use.
http://www.thistothat.com/ Roger "K Ludger" wrote in message ... wrote in message ... I need some advice on adhering glass drawer knobs to brass knob posts. They are frosted glass knobs epoxied on to brass posts. The fit between the knobs and posts is not perfect, so I need a glue that is gap-filling. I have been using some 5-minute epoxy, but it doesn't seem to work all that well on the glass, as the knobs pull apart after a while, leaving the epoxy on the brass. I want to machine the old epoxy off the posts so I will have a purely glass-to-brass joint. Any suggestions for a gap-filling adhesive for glass to brass? |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| brass to glass - best adhesive | Metalworking | |||
| brass to glass - best adhesive | Metalworking | |||
| Adhesive for chrome to glass ... | Home Repair | |||
| Interlocking Suspended Ceiling/Fixing Trunking - Self adhesive or Impact adhesive. | UK diy | |||
| Brass Oiler - Urn Type Glass | Metalworking | |||
Linear Mode
