DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Metalworking (https://www.diybanter.com/metalworking/)
-   -   brass to glass - best adhesive (https://www.diybanter.com/metalworking/274190-re-brass-glass-best-adhesive.html)

Roger Jones March 24th 09 12:55 AM
brass to glass - best adhesive
 
This is what I'd use.

http://www.thistothat.com/

Roger

"K Ludger" wrote in message
...

wrote in message
...
I need some advice on adhering glass drawer knobs to brass knob
posts. They are frosted glass knobs epoxied on to brass posts. The
fit between the knobs and posts is not perfect, so I need a glue that
is gap-filling.

I have been using some 5-minute epoxy, but it doesn't seem to work all
that well on the glass, as the knobs pull apart after a while, leaving
the epoxy on the brass. I want to machine the old epoxy off the posts
so I will have a purely glass-to-brass joint.

Any suggestions for a gap-filling adhesive for glass to brass?


All times are GMT +1. The time now is 02:11 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter