Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
BP disaster: snapped r8 collet?
"Proctologically Violated©®" wrote:
Ok, y'all know how you tighten the r8 collet/em in. Here's what happened: Upon tightening sed r8/tool, the thread of the r8 popped out, the r8 collet body/em fell out, and the drawbar and the r8 thread/nut are now just spinning in the machine, with nothing to lock it so the drawbar/threaded pc can be removed!! So the hex draw bar/r8 nut just spins freely! Well, lean that head over to horizontal so you can get a peek at it. Can you reach in and drill a couple holes in the insert? Likely cheese steel. Okay, now make a pin spanner to hold that insert. Remove. HTH, Wes |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
BP disaster: snapped r8 collet? | Metalworking | |||
Bison 5C collet chuck vs. Kalamazoo 1CC collet chuck vs. drawtube/ collet closer | Metalworking | |||
JET bandsaw failure-- casting snapped! | Woodworking | |||
Videotape Chewed/Snapped | Electronics Repair | |||
Drill out bolt - snapped bit | UK diy |