Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 12,529
Default Windmills and energy input


"Ed Huntress" wrote in message news:...

"john" wrote in message
...


snip

This one nuke plant dwarfs the output of all the windmill generation
systems in the whole country.

19,046,000 megawatt-hour facility vs 26.6 billion kWh per year


http://www.pplweb.com/ppl+generation...fact+sheet.htm


Uh, John, you've got generating capacity rates and Watt-hours a bit mixed
up. The PPL Susquehanna nuke plant is a 2.4 MW facility. The installed
wind power capacity in the US is 22.0 MW -- almost ten times as much as
PPL's nuke. PPL produces 19.0 terawatt-hours of energy per year from that
plant. Wind energy produced in the US is 48 TWh per year -- 2-1/2 times as
much as PPL's nuke, and roughly 2,000 times as much as you state above.


Ugh. I hate this giga, mega, tera business. Anyway. all of those
*relationships* are accurate as I stated them, but the second and third
sentences should read: " The PPL Susquehanna nuke plant is a 2.4 GW
facility. The installed wind power capacity in the US is 22.0 GW -- almost
ten times as much as PPL's nuke."

There. The rest of the numbers should be right.

--
Ed Huntress


  #2   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 812
Default Windmills and energy input



Ed Huntress wrote:

"Ed Huntress" wrote in message news:...

"john" wrote in message
om...



snip

This one nuke plant dwarfs the output of all the windmill generation
systems in the whole country.

19,046,000 megawatt-hour facility vs 26.6 billion kWh per year


http://www.pplweb.com/ppl+generation...fact+sheet.htm


Uh, John, you've got generating capacity rates and Watt-hours a bit mixed
up. The PPL Susquehanna nuke plant is a 2.4 MW facility. The installed
wind power capacity in the US is 22.0 MW -- almost ten times as much as
PPL's nuke. PPL produces 19.0 terawatt-hours of energy per year from that
plant. Wind energy produced in the US is 48 TWh per year -- 2-1/2 times as
much as PPL's nuke, and roughly 2,000 times as much as you state above.



Ugh. I hate this giga, mega, tera business. Anyway. all of those
*relationships* are accurate as I stated them, but the second and third
sentences should read: " The PPL Susquehanna nuke plant is a 2.4 GW
facility. The installed wind power capacity in the US is 22.0 GW -- almost
ten times as much as PPL's nuke."

There. The rest of the numbers should be right.

Itotally agree with your numnbers, thanks again.


the key word is capacity. The nuke plant can put out the capacity day
after day. Thw windmills can achieve their capacity only if the
weatherman lets them. according to power company in Wisconson that
has a windfarm, the expected energy delivery from a farm is only 30 to
35 % of capacity which actually still makes its output more than the PPL
plant, but then looking further into it the output comes when it's
mostly not needed, at night and this fluxuation screws up the orderly
flow of power in the grid.


John

  #3   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 12,529
Default Windmills and energy input


"john" wrote in message
...


Ed Huntress wrote:

"Ed Huntress" wrote in message news:...

"john" wrote in message
news:3sadnWG6lrfCDe7UnZ2dnUVZ_hmdnZ2d@giganews. com...



snip

This one nuke plant dwarfs the output of all the windmill generation
systems in the whole country.

19,046,000 megawatt-hour facility vs 26.6 billion kWh per year


http://www.pplweb.com/ppl+generation...fact+sheet.htm

Uh, John, you've got generating capacity rates and Watt-hours a bit mixed
up. The PPL Susquehanna nuke plant is a 2.4 MW facility. The installed
wind power capacity in the US is 22.0 MW -- almost ten times as much as
PPL's nuke. PPL produces 19.0 terawatt-hours of energy per year from that
plant. Wind energy produced in the US is 48 TWh per year -- 2-1/2 times
as much as PPL's nuke, and roughly 2,000 times as much as you state
above.



Ugh. I hate this giga, mega, tera business. Anyway. all of those
*relationships* are accurate as I stated them, but the second and third
sentences should read: " The PPL Susquehanna nuke plant is a 2.4 GW
facility. The installed wind power capacity in the US is 22.0 GW --
almost ten times as much as PPL's nuke."

There. The rest of the numbers should be right.

Itotally agree with your numnbers, thanks again.


the key word is capacity. The nuke plant can put out the capacity day
after day. Thw windmills can achieve their capacity only if the
weatherman lets them. according to power company in Wisconson that
has a windfarm, the expected energy delivery from a farm is only 30 to 35
% of capacity which actually still makes its output more than the PPL
plant, but then looking further into it the output comes when it's mostly
not needed, at night and this fluxuation screws up the orderly flow of
power in the grid.


Load-leveling is a problem with wind and solar, but the people who have
studied it conclude that it can supply a significant amount of power, the
amount depending on how it's implemented.

And the range of those conclusions appears to be pretty wide. Without doing
a real study of it, it appears to me that the small projects now in the
works, which generally are aimed at 5% or so of local capacity, are no
problem. Projecting into the future, they point to some systems that run
pretty well at close to 20%, where there is a good grid to work with. And
there is that study of the "wind belt" up the center of the US, which says
that if we had real long-distance distribution and a smart grid, combined
with very spread-out geographic dispersal, the system should be able to run
at 50% of the system load.

And then there is pumped storage, which seems to be mostly of use in
mountainous areas, where it's possible to work with a large head and fairly
efficient water turbines. That changes the entire equation.

All in all, my sense of it is that it's doable in the relatively modest
system percentages (maybe 5% - 20%, including solar) that are likely to
happen. So they should be implemented, IMO. Wind can be installed in a
minute fraction of the time it takes to build a nuke and get everything
running. And that renewable capacity, however small, will be a benefit to us
for a long time to come if it's economical.

None of this suggests that it's going to replace the majority of base-load
capacity. For that, the best candidate looks like nuclear fission. And I
think we should be going full-speed on those, too, with the first priority
being the development of a universal design and a streamlined approval
process. Otherwise, the up-front costs will be prohibitive, and the
implementation will be unnecessarily slow.

--
Ed Huntress


  #4   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 5,154
Default Windmills and energy input

On Thu, 22 Jan 2009 22:49:57 -0500, the infamous "Ed Huntress"
scrawled the following:

"john" wrote in message
...


the key word is capacity. The nuke plant can put out the capacity day
after day. Thw windmills can achieve their capacity only if the
weatherman lets them.


Right, and if you put 34,000 miles of New Mexico under solar panels,
one little cloud mass will black out the nation. g


according to power company in Wisconson that
has a windfarm, the expected energy delivery from a farm is only 30 to 35
% of capacity which actually still makes its output more than the PPL
plant, but then looking further into it the output comes when it's mostly
not needed, at night and this fluxuation screws up the orderly flow of
power in the grid.


Load-leveling is a problem with wind and solar, but the people who have
studied it conclude that it can supply a significant amount of power, the
amount depending on how it's implemented.


Right. The night winds seem to be more steady and the power can be
sold outside the wind farm's local area, where it's needed.


And the range of those conclusions appears to be pretty wide. Without doing
a real study of it, it appears to me that the small projects now in the
works, which generally are aimed at 5% or so of local capacity, are no
problem. Projecting into the future, they point to some systems that run
pretty well at close to 20%, where there is a good grid to work with. And
there is that study of the "wind belt" up the center of the US, which says
that if we had real long-distance distribution and a smart grid, combined
with very spread-out geographic dispersal, the system should be able to run
at 50% of the system load.


That seems awfully optimistic.


And then there is pumped storage, which seems to be mostly of use in
mountainous areas, where it's possible to work with a large head and fairly
efficient water turbines. That changes the entire equation.


Ayup. It adds millions (billions?) to the initial outlay for a
mountaintop lake, pumps, motors, pipe, etc.


All in all, my sense of it is that it's doable in the relatively modest
system percentages (maybe 5% - 20%, including solar) that are likely to
happen. So they should be implemented, IMO. Wind can be installed in a
minute fraction of the time it takes to build a nuke and get everything
running. And that renewable capacity, however small, will be a benefit to us
for a long time to come if it's economical.


Plug-in, modular nukes would handle the delays, but they're not on the
market yet.


None of this suggests that it's going to replace the majority of base-load
capacity. For that, the best candidate looks like nuclear fission. And I
think we should be going full-speed on those, too, with the first priority
being the development of a universal design and a streamlined approval
process. Otherwise, the up-front costs will be prohibitive, and the
implementation will be unnecessarily slow.


Hear, hear!

The first application (for a reactor) in 30 years was made and
approved by the NRC in 2007. Since then, 23 apps have gone in, for a
total count of 34 units. 15 of those have been approved and 3 more are
under acceptance review. It's looking better!

http://bighollywood.breitbart.com/jl...ith-gun-locks/
Oops, wrong clipboard.

Here it is:
http://tinyurl.com/6je7uc


-------------------------------------------
Jack Kevorkian for Congressional physician!
===========================================
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Windmills and energy input Wes[_2_] Metalworking 53 January 26th 09 08:01 AM
Domestic windmills put to bed. EricP UK diy 71 September 11th 08 09:49 PM
Bad news for David Cameron: windmills suck Dave Plowman (News) UK diy 0 August 9th 08 11:43 AM
Any experience here with solar panels or windmills? Thomas G. Marshall Home Repair 52 June 19th 08 12:25 AM
The reasons why windmills wont work... The Natural Philosopher UK diy 500 March 15th 08 10:30 AM


All times are GMT +1. The time now is 05:29 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"