Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 12,529
Default Windmills and energy input


"Ed Huntress" wrote in message news:...

"john" wrote in message
...


snip

This one nuke plant dwarfs the output of all the windmill generation
systems in the whole country.

19,046,000 megawatt-hour facility vs 26.6 billion kWh per year


http://www.pplweb.com/ppl+generation...fact+sheet.htm


Uh, John, you've got generating capacity rates and Watt-hours a bit mixed
up. The PPL Susquehanna nuke plant is a 2.4 MW facility. The installed
wind power capacity in the US is 22.0 MW -- almost ten times as much as
PPL's nuke. PPL produces 19.0 terawatt-hours of energy per year from that
plant. Wind energy produced in the US is 48 TWh per year -- 2-1/2 times as
much as PPL's nuke, and roughly 2,000 times as much as you state above.


Ugh. I hate this giga, mega, tera business. Anyway. all of those
*relationships* are accurate as I stated them, but the second and third
sentences should read: " The PPL Susquehanna nuke plant is a 2.4 GW
facility. The installed wind power capacity in the US is 22.0 GW -- almost
ten times as much as PPL's nuke."

There. The rest of the numbers should be right.

--
Ed Huntress


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Windmills and energy input Wes[_2_] Metalworking 53 January 26th 09 08:01 AM
Domestic windmills put to bed. EricP UK diy 71 September 11th 08 09:49 PM
Bad news for David Cameron: windmills suck Dave Plowman (News) UK diy 0 August 9th 08 11:43 AM
Any experience here with solar panels or windmills? Thomas G. Marshall Home Repair 52 June 19th 08 12:25 AM
The reasons why windmills wont work... The Natural Philosopher UK diy 500 March 15th 08 10:30 AM


All times are GMT +1. The time now is 12:08 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"