Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
OT - Buying a Spotting Scope
So I went to the range on Sunday to sight in my
new rifle. I found that without a spotting scope, I would have to wait 30-40 minutes to go downrange and look at my target. So I have to buy a scope. It looks like there's three choices. A no-name $60-$100 scope, a Bushnell Spacemaster for $300, or a name brand Nikon/Pentax/Leopold for $400. The scope will be used for casual shooting at 100 yards, 30 caliber bullets. I don't want to spend more than $400 and I'd like to get off considerably cheaper if possible. Any recommendations? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
HP1805A Dual Channel Scope plugin (100MHz) for 180 series scope | Electronics Repair | |||
Spotting Drills | Metalworking | |||
Advice on buying a tektronix TDS 544A scope | Electronics Repair | |||
opinions on buying a scope | Electronics Repair |