Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
10EE Spindle taper
For those of you who may care, the spindle taper of the Clausing 10EE is a
number 12 Jarno taper. I discovered this trying to help resolve Iggy's lathe issues. So perhaps some of you may know of a source for 12 Jarno to MT, 5C collet adapters and a test bar in anticipation of Iggy's request. Jarno tapers are identified by a taper of .6" per foot and numbered in 1/8" at the major diameter like 12 x .125 = 1.500" major diameter. Steve |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Taper on grinder spindle, how to measure | Metalworking | |||
Rockwell-Delta 10 inch lathe spindle taper? | Metalworking | |||
SPINDLE TAPER ADAPTER | Metalworking | |||
spindle taper | Metalworking | |||
Need info re spindle taper and stuck chuck on Craftsman 150 drill press | Metalworking |