10EE Spindle taper
For those of you who may care, the spindle taper of the Clausing 10EE is a
number 12 Jarno taper. I discovered this trying to help resolve Iggy's lathe
issues. So perhaps some of you may know of a source for 12 Jarno to MT, 5C
collet adapters and a test bar in anticipation of Iggy's request. Jarno
tapers are identified by a taper of .6" per foot and numbered in 1/8" at the
major diameter like 12 x .125 = 1.500" major diameter.
Steve
|