Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Gasket material
I have some 1/16 cork gasket sheets at home. I am needing the carb to
gas tank and carb to engine gaskets. Can I just make some out of this material or will it not work because it is a little thicker than the origional? Or should I use RTV instead of silicone? I appreciate any help. I have 2 tillers I am tryign to get running so I can put them up for spring. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sight glass gasket material ? | UK diy | |||
Small engine head gasket material? | Metalworking | |||
braided packing,gasket material | Metalworking | |||
where to find L gasket strip material | Home Repair | |||
High temp. gasket material and source ? | Metalworking |