 |
|
| Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
where to find L gasket strip material
I am looking for weather stripping that is L shaped and is made for
abrasive conditions. It needs to be out of rubber and not foam, and should be about 5/8 long or longer on a leg and 1/4 thick. Where might I look for this stuff? What can I use for glue? thanks, Michael Michael spam abatement, please remove 5's |
|
#2
|
|||
|
|||
|
Michael wrote: I am looking for weather stripping that is L shaped and is made for abrasive conditions. It needs to be out of rubber and not foam, and should be about 5/8 long or longer on a leg and 1/4 thick. Where might I look for this stuff? What can I use for glue? thanks, Michael Michael spam abatement, please remove 5's Try Zero International: http://www.zerointernational.com |
|
#3
|
|||
|
|||
|
mcmaster.com may also have what you are looking for...
|
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| dremel sized milling bit for cylinder head gasket material | Metalworking | |||
| Delta/Rockwell 11" lathe gears - find or make? | Metalworking | |||
| High temp. gasket material and source ? | Metalworking | |||
| where to find desktops (top only) in the uk | UK diy | |||
Linear Mode
