Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Pictures -- was Can a hard bearing ball be welded to mild steel
On Wed, 29 Oct 2008 01:49:56 -0400, the infamous "Buerste"
scrawled the following: "Ignoramus20172" wrote in message m... On 2008-10-29, Gunner Asch wrote: Tig works nicely, as does brazing and even mig and stick Tig would be prettier Here's the end result with TIG. http://igor.chudov.com/projects/Weld...Bearing-Balls/ -- Due to extreme spam originating from Google Groups, and their inattention to spammers, I and many others block all articles originating from Google Groups. If you want your postings to be seen by more readers you will need to find a different means of posting on Usenet. http://improve-usenet.org/ Very nice! I especially liked his use of the 1" filler rod. ;-/ The first thing I learned about a vise was not to stand next to it when spinning the handle. Did I just hear you type that in a soprano voice, Tawm? -- Change is the process by which the future invades our lives. -- Alvin Toffler |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Pictures -- was Can a hard bearing ball be welded to mild steel
"Larry Jaques" wrote in message ... On Wed, 29 Oct 2008 01:49:56 -0400, the infamous "Buerste" scrawled the following: "Ignoramus20172" wrote in message om... On 2008-10-29, Gunner Asch wrote: Tig works nicely, as does brazing and even mig and stick Tig would be prettier Here's the end result with TIG. http://igor.chudov.com/projects/Weld...Bearing-Balls/ -- Due to extreme spam originating from Google Groups, and their inattention to spammers, I and many others block all articles originating from Google Groups. If you want your postings to be seen by more readers you will need to find a different means of posting on Usenet. http://improve-usenet.org/ Very nice! I especially liked his use of the 1" filler rod. ;-/ The first thing I learned about a vise was not to stand next to it when spinning the handle. Did I just hear you type that in a soprano voice, Tawm? Isn't it funny that there are things you just don't forget...EVER! |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Pictures -- was Can a hard bearing ball be welded to mild steel
Isn't it funny that there are things you just don't forget...EVER!
Last night I used a big slide hammer that I made in high school, 1975. I didn't know at the time that the weight need flanges on the ends. You remember it when one of these pinches you. -- Stupendous Man, Defender of Freedom, Advocate of Liberty |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Pictures -- was Can a hard bearing ball be welded to mild steel
Stupendous Man wrote: Isn't it funny that there are things you just don't forget...EVER! Last night I used a big slide hammer that I made in high school, 1975. I didn't know at the time that the weight need flanges on the ends. You remember it when one of these pinches you. I hope you took the opportunity to make a couple flanges and bolt or weld them on to prevent future mishaps. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Can a hard bearing ball be welded to mild steel | Metalworking | |||
Ball Bearing Question | Metalworking | |||
Welded wheel bearing | Metalworking | |||
Where to get Ball Bearing rollers | Woodworking | |||
Does anyone know, for sure, if brass can be welded to steel ? | Home Repair |