Pictures -- was Can a hard bearing ball be welded to mild steel
 

On Wed, 29 Oct 2008 01:49:56 -0400, the infamous "Buerste"
scrawled the following:


"Ignoramus20172" wrote in message
m...
On 2008-10-29, Gunner Asch wrote:
Tig works nicely, as does brazing and even mig and stick

Tig would be prettier


Here's the end result with TIG.

http://igor.chudov.com/projects/Weld...Bearing-Balls/

--
Due to extreme spam originating from Google Groups, and their
inattention
to spammers, I and many others block all articles originating
from Google Groups. If you want your postings to be seen by
more readers you will need to find a different means of
posting on Usenet.
http://improve-usenet.org/

Very nice!

I especially liked his use of the 1" filler rod. ;-/


The first thing I learned about a vise was not to stand next to
it when spinning the handle.

Did I just hear you type that in a soprano voice, Tawm?


--
Change is the process by which the future invades our lives.
-- Alvin Toffler

Pictures -- was Can a hard bearing ball be welded to mild steel
 

"Larry Jaques" wrote in message
...
On Wed, 29 Oct 2008 01:49:56 -0400, the infamous "Buerste"
scrawled the following:


"Ignoramus20172" wrote in message
om...
On 2008-10-29, Gunner Asch wrote:
Tig works nicely, as does brazing and even mig and stick

Tig would be prettier


Here's the end result with TIG.

http://igor.chudov.com/projects/Weld...Bearing-Balls/

--
Due to extreme spam originating from Google Groups, and their
inattention
to spammers, I and many others block all articles originating
from Google Groups. If you want your postings to be seen by
more readers you will need to find a different means of
posting on Usenet.
http://improve-usenet.org/

Very nice!

I especially liked his use of the 1" filler rod. ;-/


The first thing I learned about a vise was not to stand next to
it when spinning the handle.

Did I just hear you type that in a soprano voice, Tawm?


Isn't it funny that there are things you just don't forget...EVER!

Pictures -- was Can a hard bearing ball be welded to mild steel
 

Isn't it funny that there are things you just don't forget...EVER!

Last night I used a big slide hammer that I made in high school, 1975. I
didn't know at the time that the weight need flanges on the ends. You
remember it when one of these pinches you.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty

Pictures -- was Can a hard bearing ball be welded to mild steel
 

Stupendous Man wrote:

Isn't it funny that there are things you just don't forget...EVER!

Last night I used a big slide hammer that I made in high school, 1975. I
didn't know at the time that the weight need flanges on the ends. You
remember it when one of these pinches you.

I hope you took the opportunity to make a couple flanges and bolt or
weld them on to prevent future mishaps.