Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Ultra thin screwdriver
On Mon, 13 Oct 2008 23:42:20 +0000, Christopher Tidy
wrote: Hi folks, I am looking for a flat screwdriver with an exceptionally thin blade, for use on clock mechanisms. The blade needs to be at least 3/16" long, but no more than 25/1000" thick. Does anyone know of a source for such a screwdriver? UK sources are preferred, if anyone knows of them. I know I can try grinding my own, but I'm not convinced I can do it neatly. Follow-ups set to rec.crafts.metalworking. Many thanks, Chris Tidy It's very easy to do "neatly" from a bit of drillrod (silver steel to you) if you have access to a vertical mill. It can certainly be done by hand with a Dremel but that does take a bit of patience and skill. Check UK sources for gunsmith screwdrivers, if there are any. You might even find something at Farnham's. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Ultra thin screwdriver | Metalworking | |||
Ultra thin screwdriver | Metalworking | |||
Ultra thin screwdriver | Metalworking | |||
Ultra thin screwdriver | Metalworking | |||
Ultra thin screwdriver | Metalworking |